Skip to main content

Bluetooth-based traffic detection

Traffax has launched BluFax, based on the globally ubiquitous Bluetooth digital communications protocol, which operates by detecting the MAC addresses of Bluetooth signals from passing cars.
February 6, 2012 Read time: 2 mins
A BluFax freeway installation in Indiana
2262 Traffax has launched BluFax, based on the globally ubiquitous 1835 Bluetooth digital communications protocol, which operates by detecting the MAC addresses of Bluetooth signals from passing cars. By positioning two units at distances of between 1-3km, vehicle travel times are calculated from the relative detection times recorded by the two units. Traffax has licensed the patent-pending technology from the University of the Maryland, where the concept originated under the support of the Maryland State Highway Administration.

Traffax says Bluetooth address matching can be used for a number of applications including measurement of travel times on both freeway and arterial roadways, measurement of origin-destination patterns, and tracking of pedestrian flows. Since it directly measures travel times and space-mean speeds, Traffax claims BluFax is one of the few technologies that offers the ability to accurately measure arterial travel times. The company says that demonstrated detection rates exceeding five per cent of the total traffic stream, yield sample sizes adequate for reliable measurement of arterial flows.

There are two versions of the Traffax BluFax unit. An off-line version is offered that stores its measurements on removable storage media for subsequent processing. This device is typically used for traffic studies, performance measurement and validation of other data collection techniques. It is self-powered and requires no communications.

A real-time version is also offered that continuously transmits the MAC addresses and detection times of passing vehicles to a collection site for continuous processing. The real-time unit is used for such applications as display of travel times on variable message signs, and data inputs to 511 telephone systems.

Related Content

  • June 30, 2016
    Machine vision’s transport offerings move on apace
    Colin Sowman considers some of the latest advances in camera technology and transport-related vision technology applications. Vision technology in the transportation sector is moving apace as technical developments on both the hardware and software sides combine to make cameras more multifunctional with a single digital camera now able to cover a multitude of tasks.
  • October 7, 2013
    Cellular-based probe system delivers real time traffic data
    Toll and traffic management solutions provider IBI Group and Cellint Traffic Solutions, a provider of real-time road traffic information based on cellular data have successfully completed the data validation phase of the regional traffic data system (RTDS) project in Vancouver. The project aims to collect, disseminate and archive real time traffic flow information for the road network in Metro Vancouver and display real time traffic flow and travel time information on regional ATIS.
  • April 23, 2013
    US 511 system, the future of traveller information?
    What started out at the turn of the millenium as a simple dial-up travel information service has grown out of all recognition in the digital age. Pete Goldin surveys the development to date of the US 511 traveller information system. In a little over a decade, 511 has gone from its original intent – a collection of recorded messages accessible via phone for pre-trip planning – to a network of dynamic traveller information services provided by states and cities throughout the US, offering access to a wide v
  • November 5, 2015
    High-res traffic data provides planners with the big picture
    Road authorities have a lot to gain from high-resolution traffic data, argues Pravin Varaiya. Traffic engineers have traditionally been forced to operate with limited data regarding the performance of their arterials. Traffic studies are often commissioned once every three years, over a few days, to get an updated estimate of utilization.