Bluetooth-based traffic detection

Traffax has launched BluFax, based on the globally ubiquitous Bluetooth digital communications protocol, which operates by detecting the MAC addresses of Bluetooth signals from passing cars.
February 6, 2012 Read time: 2 mins
A BluFax freeway installation in Indiana
2262 Traffax has launched BluFax, based on the globally ubiquitous 1835 Bluetooth digital communications protocol, which operates by detecting the MAC addresses of Bluetooth signals from passing cars. By positioning two units at distances of between 1-3km, vehicle travel times are calculated from the relative detection times recorded by the two units. Traffax has licensed the patent-pending technology from the University of the Maryland, where the concept originated under the support of the Maryland State Highway Administration.

Traffax says Bluetooth address matching can be used for a number of applications including measurement of travel times on both freeway and arterial roadways, measurement of origin-destination patterns, and tracking of pedestrian flows. Since it directly measures travel times and space-mean speeds, Traffax claims BluFax is one of the few technologies that offers the ability to accurately measure arterial travel times. The company says that demonstrated detection rates exceeding five per cent of the total traffic stream, yield sample sizes adequate for reliable measurement of arterial flows.

There are two versions of the Traffax BluFax unit. An off-line version is offered that stores its measurements on removable storage media for subsequent processing. This device is typically used for traffic studies, performance measurement and validation of other data collection techniques. It is self-powered and requires no communications.

A real-time version is also offered that continuously transmits the MAC addresses and detection times of passing vehicles to a collection site for continuous processing. The real-time unit is used for such applications as display of travel times on variable message signs, and data inputs to 511 telephone systems.
Detection, Monitoring & Machine Vision

For more information on companies in this article

Related Content

  • I-80 Smart Corridor sets the ITS standard for California's Bay Area
    March 23, 2015
    Colin Sowman looks at California’s ‘smartest’ road which will open this spring to counter congestion and accidents on one of the Bay Area’s busiest interstates. Interstate 80 (I-80) is one of the busiest roads in the San Francisco Bay area with up to 270,000 vehicles using the corridor every day. The section between the Carquinez Bridge in Crockett and the Bay Bridge not only suffers congestion during the working week but also at weekends. Traditional remedies such as building additional lanes (there are al
    Read More
  • I-80 Smart Corridor sets the ITS standard for California's Bay Area
    March 23, 2015
    Colin Sowman looks at California’s ‘smartest’ road which will open this spring to counter congestion and accidents on one of the Bay Area’s busiest interstates. Interstate 80 (I-80) is one of the busiest roads in the San Francisco Bay area with up to 270,000 vehicles using the corridor every day. The section between the Carquinez Bridge in Crockett and the Bay Bridge not only suffers congestion during the working week but also at weekends. Traditional remedies such as building additional lanes (there are al
    Read More
  • Viaduct deck renewal creates detour dilemma for MassDOT
    May 26, 2016
    As the deck renewal of the I-91 viaduct in Springfield gets underway, David Crawford looks at the preparation and planning to ease the resulting traffic congestion. Accommodating the deck renewal of a 4km-long/four-lanes in each direction viaduct in the heart of Springfield (Massachusetts’ third largest city), has involved the state’s Department of Transportation (MassDOT) in a massive exercise in transport research and ITS-based area-wide preplanning and traffic management. Supporting a workzone of well ab
    Read More
  • UK university project paves the way for smarter cities and autonomous cars
    February 1, 2016
    The new i-Motors project, led by academics from the University of Nottingham’s Geospatial Institute and Human Factors Research Group and digital technology company Control F1, aims to build a mobile platform that allows vehicles of different manufacturers and origins to transfer and store data. The project, which has received a US$1.9 million award from the UK’s innovation agency Innovate UK sets out to establish a set of universal standards on how vehicles communicate with each other, and with other ma
    Read More

Highlighted Content