Bluetooth-based traffic detection

Traffax has launched BluFax, based on the globally ubiquitous Bluetooth digital communications protocol, which operates by detecting the MAC addresses of Bluetooth signals from passing cars.
February 6, 2012 Read time: 2 mins
A BluFax freeway installation in Indiana
2262 Traffax has launched BluFax, based on the globally ubiquitous 1835 Bluetooth digital communications protocol, which operates by detecting the MAC addresses of Bluetooth signals from passing cars. By positioning two units at distances of between 1-3km, vehicle travel times are calculated from the relative detection times recorded by the two units. Traffax has licensed the patent-pending technology from the University of the Maryland, where the concept originated under the support of the Maryland State Highway Administration.

Traffax says Bluetooth address matching can be used for a number of applications including measurement of travel times on both freeway and arterial roadways, measurement of origin-destination patterns, and tracking of pedestrian flows. Since it directly measures travel times and space-mean speeds, Traffax claims BluFax is one of the few technologies that offers the ability to accurately measure arterial travel times. The company says that demonstrated detection rates exceeding five per cent of the total traffic stream, yield sample sizes adequate for reliable measurement of arterial flows.

There are two versions of the Traffax BluFax unit. An off-line version is offered that stores its measurements on removable storage media for subsequent processing. This device is typically used for traffic studies, performance measurement and validation of other data collection techniques. It is self-powered and requires no communications.

A real-time version is also offered that continuously transmits the MAC addresses and detection times of passing vehicles to a collection site for continuous processing. The real-time unit is used for such applications as display of travel times on variable message signs, and data inputs to 511 telephone systems.
Detection, Monitoring & Machine Vision

Related Content

  • July 17, 2012
    Development of cooperative driving applications for work zones
    The German AKTIV project is researching several cooperative driving applications for use in work zones. PTV's Michael Ortgiese details progress. The steep increases in traffic volumes predicted back in the early 1990s have unfortunately been proven to be more than accurate. In Germany, the AKTIV project continues to look into cooperative technologies' potential to reduce the impact of those increased traffic volumes and keep traffic moving despite limitations in infrastructure capacity.
    Read More
  • March 8, 2017
    Florida deploys BlueTOAD Spectra for traffic, travel time monitoring
    TrafficCast International has completed the implementation of its latest generation Bluetooth signal sensor detector technology, BlueTOAD Spectra, in Florida. In December 2016, the Florida Department of Transportation's Traffic Engineering Research Laboratory (TERL) approved the new BlueTOAD Spectra dual-radio Bluetooth detection system for inclusion on the State's Approved Products List (APL). At the same time, several Florida local agencies also tested the BlueTOAD Spectra. Seminole County, a Blue
    Read More
  • October 22, 2014
    Bespoke ITS is helping to reduced collisions on America’s rural roads
    David Crawford cherrypicks conference and award highlights Almost 30% of all US citizens live in rural areas or very small communities, and 34 of the 50 states exceed this level in their own populations, with the proportions rising as high as 85%. And although rural routes carry only 35% of all traffic, the accidents that occur on them account for some 54% of all US road traffic accident deaths.
    Read More
  • June 11, 2015
    Machine vision’s image of road management’s future
    Q-Free’s Marco Sinnema looks at how the commoditisation of high-quality vision-based solutions is widening their application. Machine vision technology’s entry into the ITS/traffic management sector has followed a classic top-down path. This is unsurprising given the extremely demanding performance criteria which are the standard in its market of origin, manufacturing processing. Very high image qualities combined with frame rates often in the hundreds per second range resulted in vision systems with capabi
    Read More

Highlighted Content