Skip to main content

Point Grey launches new Grasshopper3 cameras

Point Grey has extended to its Grasshopper3 USB3 Vision product line with the Grasshopper3 GigE Vision PoE camera family. The first two models in the new lineup feature Sony CMOS and CCD global shutter devices. The Grasshopper3 GS3-PGE-23S6 models use colour and monochrome versions of the 24.4 x 30.5mm (1/1.2-inch) Sony IMX174 Exmor global shutter CMOS sensor and offer image resolution of 1920x1200 pixels and frame rates up to 46 FPS. The IMX174 is the first global shutter sensor from Sony and delivers
September 25, 2014 Read time: 2 mins
541 Point Grey has extended to its Grasshopper3 USB3 Vision product line with the Grasshopper3 GigE Vision PoE camera family.

The first two models in the new lineup feature 576 Sony CMOS and CCD global shutter devices.  The Grasshopper3 GS3-PGE-23S6 models use colour and monochrome versions of the 24.4 x 30.5mm (1/1.2-inch) Sony IMX174 Exmor global shutter CMOS sensor and offer image resolution of 1920x1200 pixels and frame rates up to 46 FPS. The IMX174 is the first global shutter sensor from Sony and delivers a wide dynamic range performance of 73dB while maximising sensitivity and low light response with a peak quantum efficiency of 76%.  The sensor’s region of interest functionality can also be used to enable high-definition HD 1080p format.

The Grasshopper3 GS3-PGE-60S6 models use colour and monochrome versions of the 25.4mm (1-inch) Sony ICX694 global shutter CCD sensor and offer image resolution of 2736x2192 pixels and frame rates up to 13 FPS. The high resolution ICX694 device uses Sony’s ExVIEW HAD CCD II technology, which is targeted for improved near infrared response.

Point Grey says the new models allow them to offer more competitive price support to applications that require long cable length, such as intelligent traffic systems.

For more information on companies in this article

Related Content

  • Sony releases 7.4 megapixel stacked CMOS
    February 9, 2018
    Sony has launched a new 1/1.7-type stacked Cmos image sensor with a 7.42 (effective) megapixel RCCC filter for forward sensing cameras in advanced driver assistance systems (ADAS). The IMX324 aims to provide high definition imaging of signs approximately 160m ahead of the camera. In pixel binning mode the low light sensitivity is increased to 2,666 mV, to capture images in conditions down to 0.1 lux. In mixed lighting scenes (such as headlights and streetlights) it alternately captures dark sections at
  • Machine vision standards definition moves forward with establishment of new forum
    December 3, 2012
    The new Future Standards Forum will homogenise standards develop in the machine vision and partnering sectors. Here, machine vision industry experts discuss developments. By Jason Barnes At the Vision Show, which took place in Stuttgart at the beginning of November, the European Machine Vision Association, the US’s Automated Imaging Association and the Japan Industrial Imaging Association (JIIA) established a joint initiative, the Future Standards Forum (FSF). This, said the EMVA’s President Toni Ventura, a
  • Sony Europe ISS launches CMOS Cameras
    October 15, 2018
    Sony Europe’s Image Sensing Solutions (ISS) division says its XCL-SG1240 series of Camera Link V2.0 modules utilise a 1.1-type global shutter CMOS sensor to deliver 12 MP images at 20 fps. These cameras are suited to sectors which require exceptional detail including low (0.5 lx) or changing lighting conditions, the company adds. The module was developed by Sony ISS engineers who worked with the Sony 1.1-type Pregius GS CMOS sensor with the intention of developing a solution which extracts better image
  • Sony unveils polarised category for machine vision camera
    October 17, 2018
    Sony Europe’s Image Sensing Solutions (ISS) is showcasing its polarised category of machine vision camera at Traffic Vision in Stuttgart, Germany, 6-8 November. The company says the camera’s IMX250MZR sensor captures polarised light in four different angles. The XCG-CP510 GS CMOS camera simplifies stress inspection, contrast improvement, scratch detection, object detection, removal and enhancement from a single image capture, the company adds. The camera’s module is expected to deliver 5.1 MP polarised