Skip to main content

Nortech to present detector range and ANPR system at Parkex 2019

Nortech is to exhibit its upgraded detector range at Parkex 2019 in the UK which it says now offers detection technology packaged in a slimline housing. The company claims its 8 Series range of single and dual channel detectors will facilitate ‘plug and play’ installation while allowing full-site configuration using the DU800 diagnostics device and mobile app. Plug and play is a combination of hardware and software support that enables a computer system to recognise and adapt to hardware configuratio
February 22, 2019 Read time: 2 mins

Nortech is to exhibit its upgraded detector range at Parkex 2019 in the UK which it says now offers detection technology packaged in a slimline housing.

The company claims its 8 Series range of single and dual channel detectors will facilitate ‘plug and play’ installation while allowing full-site configuration using the DU800 diagnostics device and mobile app.

Plug and play is a combination of hardware and software support that enables a computer system to recognise and adapt to hardware configuration changes with little or no intervention by a user.

The modular design of the 8 Series detectors allow for the expansion of channels, outputs and communications interfaces via the expansion port, the company adds.

Additionally, Nortech will debut its next-generation ANPR Access V2 system which is expected to be suitable for vehicle access control applications with built-in Wiegand modes.

The system can be used in situations where vehicles need to be granted continual or temporary access to a site, such as in employee or visitor parking applications.

Parkex takes place on 2-4 April at the NEC Birmingham.

Related Content

  • Aptiv: we need overhaul of AV nervous system
    August 20, 2019
    Autonomous vehicles are changing a lot of things: Aptiv’s Christian Schäfer suggests that we need to look again at traditional approaches to vehicle architecture to find viable options for the future
  • Intetra signals a new era
    March 31, 2022
    Intetra is using Intertraffic as the launch platform for its new adaptive traffic signal controller.
  • Mobinet counters weighty cross border concerns
    November 9, 2017
    A Mobinet pilot is combining onboard weighing with V2X comms to streamline vehicle weight enforcement. David Crawford reports. Pan-European, cross-border weigh-in-motion (WIM) for trucks is now a practical possibility, following successful Scandinavian trials within the EU-co-funded Mobinet (Internet of Mobility) programme. New technology is using strain sensors, located on load-bearing components and routinely installed in truck fleet management systems.
  • Teledyne Flir: here’s how to find the right ITS camera
    January 4, 2022
    From lighting to weather, there are so many elements which need to be taken into account when choosing a camera for ITS operations. Riana Sartori from Teledyne Flir offers a buyer’s guide