Multi-function loop detector from Reno

The latest multi-function inductive loop vehicle detectors from intelligent transportation systems supplier Reno A&E are designed to reliably detect all vehicles, as well as differentiating cycles from all other vehicles. The Model C-1101-B and C-1201-B two channel loop detectors are available in 170/2070, NEMA TS1/TS2, ITS and ATC cabinet configurations and provide intersection safety without sacrificing efficiency Additional passage time for bicycles can be provided by either the loop detector or the con
November 26, 2013 Read time: 2 mins
Reno loop detector
The latest multi-function inductive loop vehicle detectors from intelligent transportation systems supplier 7435 Reno A&E are designed to reliably detect all vehicles, as well as differentiating cycles from all other vehicles. The Model C-1101-B and C-1201-B two channel loop detectors are available in 170/2070, NEMA TS1/TS2, ITS and ATC cabinet configurations and provide intersection safety without sacrificing efficiency.

Additional passage time for bicycles can be provided by either the loop detector or the controller.  Cycles receive additional green time for safe passage through intersections, while minimum passage time for motorised vehicles is maintained.

The detectors provide two outputs per channel. The primary output provides ‘call’ outputs for all vehicles, including motorcycles and cycles. The primary output can be programmed for lane line ‘LL’ mode, which only outputs for cycles. The secondary output provides a single pulse for each bicycle. The company claims both models allow the traffic engineer to detect and provide safe passage time for cycles without compromising the intersection’s operating efficiency.  This unique capability to identify bicycles from other vehicles allows the technician to program initial time and extension time in the detector for bicycles only, thus providing a safe passage time through intersections.
Detection, Monitoring & Machine Vision

For more information on companies in this article

Related Content

  • Transmax trials emergency vehicle ‘green wave’
    December 6, 2013
    Existing equipment used in Australian emergency vehicle ‘green wave’ trial. Despite the lights and sirens, accidents between the motoring public and emergency vehicles on their way to/from the scene of an incident are relatively frequent. Figures from various sources indicate that road accidents are the second most frequent cause of death for on-duty fire fighter fatalities and that more than 90% of ambulance and fire engine accidents occur when the lights are on and the sirens wailing. Other studies indica
    Read More
  • Radar effective as detection tool for hard shoulder running
    July 23, 2012
    Navtech Radar's millimetric-wave systems are being researched on the M42 in England to look into how this type of detector can assist in the opening of the hard shoulder as an additional running lane. Here, the company's Stephen Clark talks about the technology being used. In England, the Highways Agency's (the HA, an executive agency of the Department for Transport) Managed Motorways system - formerly called Active Traffic Management - uses electronic signs and signals mounted on gantries to direct drivers
    Read More
  • McCain’s ATC cabinets used in Los Angeles corridor project
    September 28, 2018
    McCain has supplied 10 Advanced Transportation Controller (ATC) cabinets for a newly opened corridor in Los Angeles which is expected to be safe for all users. The My Figueroa Corridor Streetscape Project (MyFig) was unveiled by the Los Angeles Department of Transportation (LADoT). It covers four miles of streets stretching from the downtown area to the south part of the city. McCain says its 351 ATC cabinets has doubled the corridor’s output channels to 32, which will allow the city to add more sign
    Read More
  • Idris paves the way for loop based speed enforcement
    February 1, 2012
    With the Idris system now validated as a speed verification tool, the way is open for loops to be used in more complex enforcement applications. Diamond Consulting Services (DCS), developer of the Idris inductive loop-based vehicle detection and classification system, has recently successfully conducted validation trials which, the company says, open the way for Idris to be used for speed verification and loop-based sensors to be used for more complex applications such as speed-on-green and differential spe
    Read More

Highlighted Content