Skip to main content

Cross Zlin’s optical sensors increase options for WIM

Having won the 2016 Intertraffic Innovation Award, Cross Zlin is back again with a host of new products including a shortlisted fibre-optic based weigh-in-motion system called OptiWim. Marketing manager Libor Sušil describes the system as weigh-in-free-flow as it measures the axle across the full lane width regardless of the position of the wheels and the sensor can also detect underinflated tyres even on twin wheel configurations. He likens the measuring method to that of a strain gauge but adds that
March 21, 2018 Read time: 2 mins
Made to measure: Libor Sušil of Cross Zlin

Having won the 2016 70 Intertraffic Innovation Award, 8689 Cross Zlin is back again with a host of new products including a shortlisted fibre-optic based weigh-in-motion system called OptiWim.

Marketing manager Libor Sušil describes the system as weigh-in-free-flow as it measures the axle across the full lane width regardless of the position of the wheels and the sensor can also detect underinflated tyres even on twin wheel configurations.

He likens the measuring method to that of a strain gauge but adds that the fibre-optic system provides more information, has direct temperature compensation, is unaffected by radio frequencies and achieves an accuracy of ±3%.

There are no electrical cables running to the sensor which comes in several lengths, has an expected life of 10 years and fits into a U-Bed installed in the road surface. When required, the sensor can be removed and changed without disturbing the road surface by undoing the side holder bars.

The company is in the process of having the system type approved but is confident that OptiWim’s A3 precision means it can be used for automatically penalising overloaded vehicles and will offer a speed range from 10km/h up to a theoretical 250km/h. It says automatic ticketing has seen a substantial improvement in enforcement and penalisation of violators and that removing overloaded vehicles dramatically increases a road’s lifespan.

Although the cost of individual fibre-optic sensors is higher that their traditional counterparts, Sušil says because each WIM location needs only a single sensor (in each direction), the overall cost is equivalent to using other technologies.

For more information on companies in this article

Related Content

  • Monitoring, detection and control systems inside tunnels can do much to improve traveller safety
    August 6, 2013
    ITS technology can do a great deal to improve tunnel safety, as Colin Sowman discovers. It was back in April 2004 that the European Parliament adopted the EU Directive which lays down the Minimum Safety Requirements for Tunnels in the Trans-European Road Network (2004/54/EC). This was the first unitary legislation setting minimum safety standards for European road tunnels and was designed to harmonise the management of tunnel safety at a national level. Operators of existing tunnels have until 30 April 201
  • Moxa provides clear vision for Caldecott Tunnel’s Fourth Bore
    September 15, 2014
    Caldecott Tunnel’s new Fourth Bore is utilising a bespoke high-capacity monitoring and communications network from Moxa. The Caldecott Tunnel connects Contra Costa and Alameda counties in Northern California and traditionally it has suffered severe congestion - especially during peak hours. Opened in 1937 as a twin-bore arrangement, by 1964 the increase in traffic volumes led to a third bore being added. Shortly after the third bore was opened a tidal flow was introduced with the centre bore alternating in
  • Sterela weighs in to Wallonia
    March 31, 2022
    Sterela says that its GlobalWIM High Speed Weigh-In-Motion solution is now type-approved for direct enforcement in Wallonia, the French-speaking region of Belgium. The metrological optimisation of the system has been successfully achieved and the first site is now legally operational.
  • Marwis mobile road sensor on display by Lufft
    October 6, 2015
    German measurement technology specialist, G. Lufft is here at the ITS World Congress with a clear message: although stationary road weather information sensors have been in use for many years, even the densest RWIS network can’t cover what Marwis, the innovative mobile road sensor, is capable of.