Cross Zlin’s optical sensors increase options for WIM

Having won the 2016 Intertraffic Innovation Award, Cross Zlin is back again with a host of new products including a shortlisted fibre-optic based weigh-in-motion system called OptiWim. Marketing manager Libor Sušil describes the system as weigh-in-free-flow as it measures the axle across the full lane width regardless of the position of the wheels and the sensor can also detect underinflated tyres even on twin wheel configurations. He likens the measuring method to that of a strain gauge but adds that
March 21, 2018 Read time: 2 mins
Made to measure: Libor Sušil of Cross Zlin

Having won the 2016 70 Intertraffic Innovation Award, 8689 Cross Zlin is back again with a host of new products including a shortlisted fibre-optic based weigh-in-motion system called OptiWim.

Marketing manager Libor Sušil describes the system as weigh-in-free-flow as it measures the axle across the full lane width regardless of the position of the wheels and the sensor can also detect underinflated tyres even on twin wheel configurations.

He likens the measuring method to that of a strain gauge but adds that the fibre-optic system provides more information, has direct temperature compensation, is unaffected by radio frequencies and achieves an accuracy of ±3%.

There are no electrical cables running to the sensor which comes in several lengths, has an expected life of 10 years and fits into a U-Bed installed in the road surface. When required, the sensor can be removed and changed without disturbing the road surface by undoing the side holder bars.

The company is in the process of having the system type approved but is confident that OptiWim’s A3 precision means it can be used for automatically penalising overloaded vehicles and will offer a speed range from 10km/h up to a theoretical 250km/h. It says automatic ticketing has seen a substantial improvement in enforcement and penalisation of violators and that removing overloaded vehicles dramatically increases a road’s lifespan.

Although the cost of individual fibre-optic sensors is higher that their traditional counterparts, Sušil says because each WIM location needs only a single sensor (in each direction), the overall cost is equivalent to using other technologies.

Detection, Monitoring & Machine Vision

For more information on companies in this article

Related Content

  • Adaptive provides Kazakhstan ANPR
    July 18, 2022
    Cameras are combined with WiM system along three upgraded highways spanning 471km
    Read More
  • Weathering the elements: how weather affects the network
    July 29, 2013
    Weather-related problems can render cost-cutting counter productive, according to CommScope’s Philip Sorrells. When severe weather conditions make headlines every winter, motorists and travellers seem willing to accept the impact on the trains and roads and yet take for granted that the communications networks will continue uninterrupted. They often appear far more upset that the information system does not give them an update on road conditions, train services or bus arrival times than they are about the a
    Read More
  • IRD’s TACS screens vehicles for unsafe tyres
    September 4, 2020
    IRD’s Tire Anomaly and Classification System (TACS) is an innovative technology that identifies potentially dangerous tyre anomalies before accidents occur. Tyre anomalies are conditions such as underinflated, flat, missing or mismatched tyres. These tyre problems can result in vehicle imbalance, reduced maneuverability, improper load distribution, reduced braking performance, poor fuel economy, and reduced tyre life. Pavement damage can also result from increased loads on tyres when adjacent tyres are flat or mismatched in size.
    Read More
  • Kistler Weigh-In-Motion system obtains OIML R-134 certification
    June 1, 2015
    Kistler gained OIML R-134 certification for its Weigh-In-Motion (WIM) system consisting of Lineas quartz WIM sensors and the Kistler WIM Data Logger. OIML R-134 – the international metrology standard for legal weighing applications – enables use of Kistler WIM systems in weight-based toll collection and automatic weight enforcement applications. Kistler technology provides automated real-time traffic monitoring without impacting traffic flow. Kistler’s OIML-certified, maintenance-free WIM systems utilize d
    Read More

Highlighted Content