Skip to main content

Caltrans upgrades video wall

When Caltrans district 7 began the first phase of a multi-phase audio-visual (AV) system upgrade at its Los Angeles facility, it contracted with Electrosonic to create a brighter, more reliable video wall for traffic monitoring that takes advantage of the latest in projection technology. “Caltrans district 7 has more than 400 cameras on the highways of Los Angeles and Ventura counties,” says Electrosonic project manager Guy Fronte. “They can review camera feeds 24/7 in the facility and when there’s a traffi
February 26, 2013 Read time: 3 mins
RSSWhen 3879 Caltrans district 7 began the first phase of a multi-phase audio-visual (AV) system upgrade at its Los Angeles facility, it contracted with 6683 Electrosonic to create a brighter, more reliable video wall for traffic monitoring that takes advantage of the latest in projection technology.

“Caltrans district 7 has more than 400 cameras on the highways of Los Angeles and Ventura counties,” says Electrosonic project manager Guy Fronte. “They can review camera feeds 24/7 in the facility and when there’s a traffic event, road damage or an accident, they can magnify that feed on the video wall. The video wall is integral to 24-hour traffic management.”

The existing video wall comprises a twelve-screen centre unit in a four by three configuration flanked by a pair of six screen three by two units. The giant wall features 80-inch diagonal screens in the centre and 52-inch screens on the sides.

The standard format of the wall has single camera feeds on the side screens and two by two graphic traffic patterns on the centre screen with single-camera feeds surrounding them. “They monitor heavy traffic volume locations and can bring any one of those feeds up on the larger central display as needed,” Fronte explains.

The wear and tear of more than five years of constant operation had taken their toll on the existing rear-projection engines and begun to degrade the facility’s ability to monitor traffic, so Electrosonic replaced the video wall engines with 7336 Christie one-chip SXGA displays to take advantage of improved projector quality. Christie RPMSP-D132U displays were selected for the centre screen and RPMX-D132U displays for the side screens.

The side projectors were installed in existing cabinets behind the video wall; the centre projectors were placed in a huge metal framework previously built by Electrosonic.

“Caltrans district 7 has the most spacious rear-projection room I’ve ever worked in,” says Fronte. “It’s very well thought out, so replacing the engines was quite simple.”

The primary challenge for the installation was working in conjunction with the 24/7 hours of the facility. “We couldn’t take down the wall during rush hours, so we swapped out one projector at a time to allow for continuous operation,” Fronte notes.

Video wall control is achieved using a Quantum processor previously installed by Electrosonic. The Crestron touchscreen control system that operates the wall turns the system on and off and monitors lamp life was modified to accommodate the new projector engines.

Electrosonic also furnished forty-eight spare lamps and is providing an extensive two-year service contract, which includes complete parts and labour, unlimited telephone support, proactive preventive maintenance visits and eight-hour response time on weekdays.

Related Content

  • June 11, 2013
    CMOS cameras used to create video pedestrian crossing
    The city of Cologne, Germany has installed two CMOS-camera based video pedestrian light systems that will recognise waiting pedestrians and extend the green phase if there are still people crossing after the standard time allocation. The system, implemented by Siemens, uses two Flir cameras. The safe walk camera observes the waiting area. A stereo camera with two CMOS 1/3-inch mono sensors and 3 mm lenses is mounted 3.5 metres above the ground to cover an area of 12 sq m. This camera is set to recognise on
  • June 14, 2016
    Econolite and Image Sensing Systems enhance video detection in Colorado
    The City of Pueblo, Colorado, has chosen Autoscope RackVision Pro 2 (RVP2), from Econolite and Image Sensing Systems, to enhance video detection performance at intersections. Autoscope RVP2 with software version 10.5.0 will enable Pueblo to achieve the upgrade cost effectively by eliminating the need to replace current cameras, as well as using one RVP2 to operate two cameras. The City has ordered 39 RVP2 systems to be installed this year. The City of Pueblo was an early adopter of video detection technol
  • June 15, 2017
    McCain unveils its latest ATC controller
    US-based McCain has introduced the FLeX controller, the smallest in its ATC eX series of transportation controllers. Measuring 140mm tall, the compact controller features include front panel access to data, optional built-in Wi-Fi and a full 16-line display screen with a split-screen option for users operating Omni eX intersection control software. The FLeX controller is available in both shelf- and rack-mount configurations and upgrades any Caltrans or ATC cabinet without cumbersome wiring or programming.
  • April 23, 2013
    Intelight pushes touc screen interface for its X2 controller at ITS America
    Intelight remains focused on its ATC compliant X2 controller at this year’s show, reminding conference goers that it features a color touch screen interface that allows for third-party applications to run in tandem with traffic applications without interference.