Skip to main content

Allied Vision and TORC Robotics help blind driver ‘see’

TORC Robotics has partnered with the Robotics and Mechanisms Laboratory (RoMeLa) at the Virginia Polytechnic Institute and State University (Virginia Tech) with the aim of developing vehicles for the next generation of National Federation of the Blind (NFB) Blind Driver Challenge vehicles. The NFB developed the Blind Driver Challenge which calls upon developers and innovators to create interface technologies to allow those who are blind to drive a car independently. Held at the Daytona Speedway as a pre
May 22, 2015 Read time: 3 mins
TORC Robotics has partnered with the Robotics and Mechanisms Laboratory (RoMeLa) at the Virginia Polytechnic Institute and State University (5593 Virginia Tech) with the aim of developing vehicles for the next generation of National Federation of the Blind (NFB) Blind Driver Challenge vehicles.

The NFB developed the Blind Driver Challenge which calls upon developers and innovators to create interface technologies to allow those who are blind to drive a car independently.  Held at the Daytona Speedway as a pre-race event for the annual Rolex 24 sports car endurance race, a blind driver was to independently drive the vehicle down the main straight onto the road course.  

Using a crossover SUV, TORC implemented its ByWire drive-by-wire conversion modules, SafeStop wireless emergency stop system, and PowerHub distribution modules on the vehicle.  Drive-by-wire gives a driver electronic control of a vehicle.  The premise comes from the fly-by-wire system, where an aircraft’s controls produce electronic signals which are read and put through computing systems connected to actuators that control the surfaces of the wings and tail.

Jesse Hurdus, TORC’s project manager for this event, stated, “Cars are much further behind in taking this step.  In order to have an autonomous vehicle, you need to have it so a computer can control the throttle, transmission, and braking systems.  This is drive-by-wire”.

The team also used light detection and ranging (LIDAR) which measures distance by emitting a laser pulse and analysing the reflected light to determine the obstacles a driver has to drive around.  However, LIDAR has difficulty with classifying obstacles and differentiating objects such as vegetation from other solid objects, which is where Allied Vision’s Prosilica GC1290C camera provided the solution.

TORC used the camera to help overcome the challenges LIDAR presents, by taking sensor data and feeding it into the software to provide an understanding on what is around the vehicle and detecting lane markings. The information is fed back to the autonomous system and provides input to the blind driver so that he or she can keep the vehicle centred and within the lane.  

The blind driver wears special DriveGrip gloves and sits on a SpeedStrip padded insert on the driver’s seat.  The gloves contain small vibrating motors on top of each finger which help relay steering information from the autonomous system.  The padding on the driver’s seat also contains vibrating motors stretching along the driver’s legs and back which relay the vehicle’s speed information and vibrate to tell the driver to accelerate or brake. Vibrations in the gloves to signal the direction the car needs to be turned.

While the focus of TORC’s systems was specifically for the Challenge, they can be potentially used for future solutions.  Hurdus concluded, “This was an exploratory effort to see how we could use the cameras to achieve the goal.  A person blind from birth was able to drive a vehicle outfitted with sensor technology to give him an understanding of the environment generated by a combination of Allied Vision’s cameras, LIDAR systems, and GPS localisation systems.  The fusion of all this data was able to give this person the ability to ‘see’ the environment as a person would be able to see through their own eyes.”

Related Content

  • Cruise launches shared electric AV
    January 23, 2020
    Cruise, a self-driving start-up owned by General Motors, has unveiled a shared electric autonomous vehicle (AV) in San Francisco which has no steering wheel or pedals. 
  • The benefits of combining enforcement and traffic management
    February 27, 2013
    Jason Barnes considers how combining enforcement equipment with other traffic management technologies might benefit our future – if only the will were really in place to do so. During the ITS World Congress in Vienna in October last year, Navtech Radar and Vysion­ics ITS announced a strategic partnership that would combine the expertise of Navtech in millimetre-wave wide-area surveillance technology with Vysionics’ machine vision-based automatic number plate recognition (ANPR) and average speed measurement
  • Dutch flying car successfully concludes test flights
    April 3, 2012
    Dutch company PAL-V Europe has concluded test flights of its flying car, the PAL-V (Personal Air and Land Vehicle). The patented vehicle flies in the air like a gyrocopter with lift generated by an auto-rotating rotor and forward speed is produced by a foldable push propeller on the back. On the road it drives like a sports car. No new infrastructure is required because it uses existing roads and airstrips.
  • Radar effective as detection tool for hard shoulder running
    July 23, 2012
    Navtech Radar's millimetric-wave systems are being researched on the M42 in England to look into how this type of detector can assist in the opening of the hard shoulder as an additional running lane. Here, the company's Stephen Clark talks about the technology being used. In England, the Highways Agency's (the HA, an executive agency of the Department for Transport) Managed Motorways system - formerly called Active Traffic Management - uses electronic signs and signals mounted on gantries to direct drivers