Skip to main content

Over-height vehicle detection system implemented on New York City Parkways

A US$4.8 million over-height vehicle detection system has just been completed on two New York City parkways in a bid to minimise truck collisions, improve road safety and protect highway infrastructure. The infrared system identifies and alerts over-height vehicles illegally using the parkway to prevent the vehicles from striking low-clearance bridges, which are found on most parkways in New York. The system was installed at four locations on the Hutchinson River Parkway in the Bronx and one location on the
November 9, 2016 Read time: 2 mins

A US$4.8 million over-height vehicle detection system has just been completed on two New York City parkways in a bid to minimise truck collisions, improve road safety and protect highway infrastructure. The infrared system identifies and alerts over-height vehicles illegally using the parkway to prevent the vehicles from striking low-clearance bridges, which are found on most parkways in New York. The system was installed at four locations on the Hutchinson River Parkway in the Bronx and one location on the Grand Central Parkway in Queens.

The detection systems, developed by the 1780 New York State Department of Transportation, are part of the state’s latest effort to keep commercial vehicles off parkways and improve roadway safety across the State. Bridge strikes can result in serious accidents, significant traffic delays and damage to the bridges.

Using infrared beams, the detection system identifies an over-height vehicle illegally using a parkway, captures the vehicle’s movements on video and then posts an alert message for the driver on an electronic variable message sign, enabling the driver to leave the highway before encountering a bridge. The data and video are also sent to the Department of Transportation’s Joint Traffic Management Center so that police can assist in getting a truck safely off the roadway, or mobilise quickly if an accident occurs.

Large commercial trucks and tractor trailers are prohibited from entering parkways in New York because the roadways, built in the 1930s and 1940s, were designed for automobiles and have low bridge clearances, with some as low as seven feet.

The project has received a Platinum Award by the American Council of Engineering Companies, an organisation that honours excellence in the engineering field.

For more information on companies in this article

Related Content

  • AVT cameras, part of a new generation of ETC
    August 20, 2015
    Allied Vision Technologies (AVT) has supplied Norwegian company Q-Free with its high performance machine vision cameras for use in electronic toll collection (ETC) systems. Q-Free has developed an ETC installation based on a single gantry which relies on the latest machine imaging systems, radio systems and automatic license plate recognition (ALPR) software technologies to collect toll data. This versatile system is designed to do pure video tolling or a combination of video and radio tolling depending
  • IRD polishes WiM’s green credentials
    December 21, 2020
    A project in Canada is proving that Weigh in Motion can have a positive environmental impact, by helping to reduce emissions. Adam Hill looks at International Road Dynamics’ numbers
  • Ouster Lidar aids German V2X plans 
    November 3, 2021
    Researchers built 60 mobile measuring stations to be deployed across a 4.3km stretch
  • MoDOT ‘Road to Tomorrow’ ready to move on pilot projects
    June 17, 2016
    Launched in 2015, the Missouri Department of Transportation’s (MoDOT) ‘Road to Tomorrow’ initiative is ready to move on five pilot projects, according to Equipment World. MoDOT plans to utilise innovation and construction to rebuild the state’s oldest interstate highway, Interstate 90 and make the highway from Kansas City to St Louis available to private industry, entrepreneurs and innovators as a laboratory for construction of the next generation of highways. MoDOT has made a 2016 TIGER Grant request