Skip to main content

Growing ITS capability, a way to increase infrastructure capacity

Iteris's Greg McKhann makes the case for policymakers to look more seriously at the use of ITS as a means of increasing existing infrastructure capacity
February 2, 2012 Read time: 4 mins
Greg McKhann, Iteris

Iteris's Greg McKhann makes the case for policymakers to look more seriously at the use of ITS as a means of increasing existing infrastructure capacity


In the current climate, ITS' cost-effectiveness should be at the forefront of policymakers' minds. By comparison with traditional methods of increasing infrastructure capacity, for which read road-building, it is much more swiftly deployable and environmentally friendly.

The advances which have occurred in video-based detection in recent years are particularly notable. In terms of cost, developments in the consumer electronics sector are a big driver. Naturally, as the volumes of electronic devices produced increase, prices comes down. And as processors become more efficient and memory gets cheaper, cost-effectiveness increases further. Just 10 years ago video detection was merely 'interesting' - a curiosity, and one which didn't work very well. Now, advances in imager, optical filter and lens technology mean it is widely accepted as an effective traffic monitoring and management tool.

Extended capabilities

Increasing detection capabilities are opening the way to a whole raft of new and extended applications. Collision avoidance at intersections is one area that could see major growth. An advantage over inductive loops in this application is video's wide-area monitoring capability: a field of view extending over several hundred feet which can be monitored up to 30 times a second. To monitor the several hundred feet between signals in a city block setting using loops would require them to be deployed in a continuous line. By contrast, virtual loops, which can be deployed in an almost infinite number of ways by a simple mouse-click on the image within a camera's field of view, can monitor vehicles' approach speeds versus signal phase. Phases can be delayed or adjusted where appropriate.

Video detection also allows better accommodation of new adaptive signal control algorithms. SCOOT and SCATS have been around for many years and traffic engineers are well aware of their capabilities and how to work with them. Newer algorithms need new detection and classification techniques and the point-and-click capabilities of video make it more able to adapt than other 'single-point' detection technologies.

Another emerging smart application is bicycle detection. In university towns in particular this is gaining interest. However, as the trend towards making fewer short trips using vehicles grows it will become increasingly common elsewhere.

Falling price points are also opening up new opportunities. Video has tended to do well at major intersections which typically require anything between six and 10 loops. However, 73 Iteris's VersiCam, which was launched nine months ago, epitomises the new trend.

VersiCam was specifically designed for sites which require only a handful of detection zones (typically one or two). Differentiated from the company's well-established Vantage Edge2 family of products by its fixed configuration of fewer virtual zones and output channels that reflect the requirements of a less complex application, this more price-sensitive product makes it realistic to use video at, for example, semi-actuated intersections where a minor side street which only needs to be serviced on demand meets a major arterial.

Wireless capabilities are already well established in the video arena and further aid speed of both deployment and redeployment. Connectivity will continue to improve. In the longer term, it will allow video - and other detection solutions - to complement cooperative infrastructure (Vehicle-Infrastructure Integration/IntelliDrive) systems as the more information that can be gleaned from an intersection, the more can be passed to approaching vehicles. Vehicles might know their own positions (via GPS) and speeds/vectors but they will need information on signal states, lane-by-lane occupancy, the presence of pedestrians and so on if we are to improve the health and safety of our roads. Video can do all of this cost-effectively.

Economic crisis

In the short-term, there is an impression of universal challenges. In a lot of areas of spending, governments are currently looking to make cuts. As a result customers, in the form of departments of transportation, states and geographic regions and so on are pulling in different directions - this in despite of sharing many of the same, broader aims and challenges. In the long run, however, infrastructure investment has proven benefits; we need to look at the current economic situation and proposed stimulus packages as more than a one-time hit.

The various ITS trade associations are to some degree 'the industry'. They are the mouthpieces. But it is also incumbent upon individual companies and even individuals themselves to spread the word. It is up to the practitioners to turn their hands to educating. It is also up to the media to keep challenging and be vocal because at present the message is not getting across as well as it might. Although the beginning of this article has concentrated on the advantages of video-based systems, the reality is that through ITS collectively the modern transport engineer has an impressive array of sensor options at his or her disposal and there is a real need to convey ITS's true worth and potential to key decision-makers.

For more information on companies in this article

Related Content

  • The challenging European road to carbon neutrality and the need for distance-based charging
    November 1, 2023
    Fuel taxes are falling and EVs have the potential to create social equity issues. The answer may lie in expanding the use of technology which has successfully been used for two decades with trucks
  • US state of the art workzone safety
    January 25, 2012
    The Texas Transportation Institute's Jerry Ullman talks about the state of the art in work zone safety in the US. Work zones are places where, perhaps more than anywhere else on the road network, mobility and safety are strongly linked. Historically, field crews and contractors wanted vehicles in work zones to be moving as slowly as possible, assuming that made conditions the safest for work crews. We are though starting to see a shift in such thinking with the realisation that excessive delays or slow-down
  • New ANPR solutions overcome variables
    May 18, 2018
    The sheer range of variables makes it difficult to find a single algorithm to ensure a 100% standard of ANPR. David Crawford investigates new processing technology. Automatic number plate recognition (ANPR), using optical character recognition and image-processing to identify vehicles, plays key roles in traffic monitoring and law enforcement, access and parking control, electronic toll collection, vehicle security and crime deterrence. Overall, system performance is well rated, with high levels of
  • Wi-SUN: here’s why mesh networking works
    May 10, 2019
    There are several networking options available for smart city planners. Phil Beecher of Wi-SUN Alliance makes the case for wireless mesh networks when it comes to rolling out IoT solutions The Internet of Things (IoT) is growing fast. Connecting thousands of sensors and control systems in bi-directional networks is paving the way for a new generation of smart city and transport infrastructures. For many of these applications, wireless connectivity is essential where cable installation is not practical.