Wireless video interface for automated traffic tolling

Canadian video interface supplier Pleora Technologies has unveiled the world’s first embedded hardware solution for delivering real-time video over a standard IEEE 802.11 wireless link. With Pleora's iPORT NTx-W embedded video interface, designers can quickly and easily integrate high-speed wireless connectivity into imaging systems where video cabling creates complexity, cost, and usability challenges. The device streams uncompressed video with low, consistent latency at sustained throughputs of more t
July 16, 2014 Read time: 2 mins
Canadian video interface supplier 7179 Pleora Technologies has unveiled the world’s first embedded hardware solution for delivering real-time video over a standard 6781 IEEE 802.11 wireless link. With Pleora's iPORT NTx-W embedded video interface, designers can quickly and easily integrate high-speed wireless connectivity into imaging systems where video cabling creates complexity, cost, and usability challenges.


The device streams uncompressed video with low, consistent latency at sustained throughputs of more than 150 Mb/s over an IEEE 802.11n wireless link. Video is transferred directly to a laptop, tablet, or single-board computer, eliminating the need for a desktop PC with an expensive frame grabber card. The ultra-compact hardware is easily integrated with core sensor electronics and is fully compliant with Version 2.0 of the GigE Vision standard, simplifying its use in multi-vendor environments.

According to Pleora, the interface meets growing demand for wireless video connectivity in medical, military, transportation and industrial automation applications.

In free-flow traffic tolling systems that must operate 24/7 in all weather conditions, the interface is easily embedded into cameras to eliminate expensive video cabling, setup and networking components. It provides a large frame buffer, allowing fast sensor readout of high data rate images and metered delivery of data over the wireless link directly to a small form factor, lower power processing platform that can be located at the roadside for more convenient maintenance. The embedded video interface firmware can be upgraded via the wireless link, further simplifying in-field maintenance.

“In many imaging applications, video cabling is cumbersome and adds system complexity and component costs,” said Pleora Kimm Krueger, vice president of Marketing. "Our iPORT NTx-W Embedded Hardware allows imaging system manufacturers to solve these end-user challenges with real-time wireless video capability that is reliable, standards compliant, and works with almost any type of computer as the end-point."

Detection, Monitoring & Machine Vision Networking & Communication Systems Charging, Tolling & RUC

For more information on companies in this article

Related Content

  • Zebra2 from Point Grey
    November 23, 2012
    Point Grey has announced what it claims as breakthrough in innovation with its new multi-interfaced Zebra2 camera line. The Zebra2 fulfils a growing demand in traffic and surveillance installations that require real-time viewing in addition to post-processing such as ALPR/ANPR and incident analysis. Available in both 2 MP and 5MP CCD models, the Zebra2 provides the ability to simultaneously stream low latency uncompressed video over HD-SDI as well as send compressed or uncompressed images through a Gigabit
    Read More
  • Future of tolling: the priorities
    January 14, 2020
    In the final part of his investigation into the future of tolling technology, Josef Czako of Moving Forward Consulting asks what industry figures see as the priorities going forward…
    Read More
  • ITS asset management matters
    April 26, 2013
    Maintenance of on-road ITS kit needs to become more sophisticated; while new technologies can deliver better road maintenance. David Crawford investigates both sides of the issue "Good information is key to effective ITS asset maintenance,” says Ian Routledge of the Ian Routledge Consultancy (IRC), whose Imtrac (Information Management for TRAffic Control) system is poised for European expansion. Developed as an ‘intelligent filing cabinet’ for storing information about on-road equipment, the online database
    Read More
  • Active Silicon’s frame grabbers for traffic vision systems
    October 29, 2014
    Active Silicon offers its well established Camera Link and analogue frame grabbers in PC/104 and PCI/104-Express formats for use in real-time traffic vision systems. The Phoenix range contains two Camera Link PC/104 frame grabbers. The D24CL-104P32 supports acquisition from a single base Camera Link camera, while the D48CL-104PE1, using the PCI express bus, supports acquisition from a single medium or two base cameras. These two products have extensive on-board IO and support a wide operating temp
    Read More

Highlighted Content