Weigh-in-motion scales aid container terminal efficiency

Intercomp weigh-in-motion (WIM) scale systems have been installed for use in the lanes at the West Basin Container Terminal (WBCT) within the Port in Long Beach, California, to automate the weighing process and replacing the older static truck scales. Intercomp’s LS-WIM weigh-in-motion systems feature industry-leading strain gauge load cell technology, the same type used in static truck scales for increased accuracy, repeatability and fast response times. The small footprint of the scales compared to
July 3, 2015 Read time: 1 min
1982 Intercomp weigh-in-motion (WIM) scale systems have been installed for use in the lanes at the West Basin Container Terminal (WBCT) within the Port in Long Beach, California, to automate the weighing process and replacing the older static truck scales.

Intercomp’s LS-WIM weigh-in-motion systems feature industry-leading strain gauge load cell technology, the same type used in static truck scales for increased accuracy, repeatability and fast response times.

The small footprint of the scales compared to traditional static truck scales means they can be installed in a matter of days with minimal civil works and reduced downtime.

Intercomp’s LS-WIM scales are also integrated with the terminal operating system (TOS) along with cameras, audio integration and RFID.

According to Robert Chou, IT Manager at WBCT, “WIM is an exciting solution to our gate capacity problem. This essentially transforms every pedestal into a scale lane.”
Detection, Monitoring & Machine Vision Classification & Data Collection

Related Content

  • May 8, 2015
    IRD complements WIM with tyre under-inflation detection
    To complement its existing WIM offering, IRD has introduced a system to detect under-inflated and flat tyres at highway speeds. Tyre inflation pressure has both safety and economic impacts for road users and none more so than with commercial vehicles. An underinflated tyre has decreased directional control, increased risk of catastrophic failure, and negatively impacts tyre life and fuel economy. In June 2014 the USDOT published Large Truck and Bus Crash Facts 2012 in which the Federal Motor Carrier Safety
    Read More
  • June 14, 2012
    IRD customised weight enforcement system goes live in Spokane
    International Road Dynamics (IRD) has been working with the Washington State Patrol (WSP) and the Washington State Department of Transportation (WSDOT) to support delivery of a customised weight enforcement and commercial vehicle inspection solution which integrates vehicle identification, credential screening and data collection for the Spokane Port-of-Entry (POE) Weigh Station on I-90. Yesterday, the station’s grand opening was held at the POE which is located on Interstate 90 one mile west of the Washing
    Read More
  • May 24, 2016
    High-speed WIM moves onto the main highway
    High-speed weigh-in-motion is starting to make its mark on both sides of the Atlantic. As a transit country the Czech Republic experiences a large number of overloaded vehicles, which greatly increase highway maintenance costs. This prompted its Transport Ministry to trial an extension of the capabilities of the existing truck tolling system to allow the dynamic high-speed weighing of cargo vehicles. In effect the tolling enforcement gantries become weigh-in-motion (WIM) locations.
    Read More
  • April 9, 2014
    Axle scale systems with wireless weighing
    Intercomp has integrated RFX wireless weighing technology with its AX90 axle scale systems to provide a cable-free operation with wireless communication to a variety of devices. Calibration is stored at the scale providing users with the ability to interchange all components. Alternatively, users are able to interface their own indicator to the scales using analogue output versions. Available in a variety of lengths, capacities and configurations to weigh anything from single to multi-axle vehicles, AX90
    Read More

Highlighted Content