Skip to main content

Minnesota DOT deploys GTT’s Canoga to curb intersection vehicle crashes

Minnesota Department of Transportation (MnDOT) is working toward making the state’s roads safer, using the Canoga traffic sensing solution from Global Traffic Technologies (GTT) to warn at-risk drivers when cross-traffic is approaching. Nearly 70 per cent of fatal vehicle collisions in Minnesota, as well as other states, occur on roads in rural communities, where higher speeds, varying terrain and inconsistent sightlines can put many drivers in danger. The MnDOT initiative is part of the nationwide Towards
September 3, 2014 Read time: 2 mins

2103 Minnesota Department of Transportation (MnDOT) is working toward making the state’s roads safer, using the Canoga traffic sensing solution from 542 Global Traffic Technologies (GTT) to warn at-risk drivers when cross-traffic is approaching.
 
Nearly 70 per cent of fatal vehicle collisions in Minnesota, as well as other states, occur on roads in rural communities, where higher speeds, varying terrain and inconsistent sightlines can put many drivers in danger.

The MnDOT initiative is part of the nationwide Towards Zero Deaths initiative, which aims to encourage safer driving strategies for rural and state roads and instil a new driving culture throughout the US. As part of the program, MnDOT is installing rural intersection conflict warning systems (RICWS) at intersections with higher crash rates throughout the state.
 
Canoga includes non-invasive micro-loops and conduits installed under the pavement, spaced about 20 feet apart. The system measures the time it takes for a vehicle to pass between the sensors to determine the vehicle’s speed and calculate the time the vehicle will take to reach the intersection. A highly conspicuous traffic sign flashes bright yellow warning lights to alert drivers that a vehicle is approaching. The sensors are installed by boring horizontally under the pavement on the side of the road, ensuring they are protected from traffic and inclement weather, so ongoing maintenance is unnecessary.

GTT worked with MnDOT’s project designer, WSB & Associates, which selected Canoga as part of their traffic sensing strategy, citing the system’s reliability and easy installation as key factors in the decision.
 
“Across the state, there are dozens of intersections where trees, hills and winding roads obscure views for drivers,” said Janelle Borgen, ITS manager for WSB & Associates. “We needed a reliable system that could sense approaching vehicles when drivers couldn’t.”
   
“With Canoga, we know exactly how long it takes for vehicles to reach the intersection based on the speeds they’re travelling,” said Borgen. “We’ve set the warning signals to give cross-traffic drivers about seven seconds of warning time. The signals flash so drivers on crossroads know that a vehicle is approaching and to stay clear of the intersection.”

For more information on companies in this article

Related Content

  • LED road studs aid level crossing safety
    June 16, 2014
    Active LED solar road studs supplied by Rennicks UK have been granted a Certificate of Acceptance by the authority responsible for the UK’s railways, paving the way for the studs to be installed at level crossings around the country. Rennicks say that the road studs are an intuitive signal to pedestrians, cyclists and drivers in the approach to and crossing the track. The studs use dual LEDs with an internal prismatic system for high performance and solar/battery technology for environmental sustaina
  • Moxa provides clear vision for Caldecott Tunnel’s Fourth Bore
    September 15, 2014
    Caldecott Tunnel’s new Fourth Bore is utilising a bespoke high-capacity monitoring and communications network from Moxa. The Caldecott Tunnel connects Contra Costa and Alameda counties in Northern California and traditionally it has suffered severe congestion - especially during peak hours. Opened in 1937 as a twin-bore arrangement, by 1964 the increase in traffic volumes led to a third bore being added. Shortly after the third bore was opened a tidal flow was introduced with the centre bore alternating in
  • Communication: the future of machine vision
    May 30, 2013
    Jason Barnes asks leading machine vision industry figures what they consider to be the educational barriers to the technology’s increased uptake by the ITS sector. The recent rush by some organisations within the ITS sector to associate themselves with the term ‘machine vision’ underlines just how important the technology has become in a relatively short space of time. However, despite the technology having been applied in certain traffic management applications for some years, there remains a significant s
  • DC cameras target over-sized trucks
    June 19, 2013
    Washington, DC, Department of Transportation is rolling out a new system of traffic cameras designed to target over-sized trucks driving on residential streets. Police and the DOT have received complaints about trucks ignoring signs warning truck drivers not to pass through residential areas, so they’re testing the eight new cameras. The cameras are portable, so they can be easily moved to different locations. The District plans to have them fully operational and issuing tickets within the next two months