Hot spot detector prevents road tunnel fires

Sick’s new hot spot detector system proved its worth only one week after being installed by preventing a fire in the Karawanks Tunnel, Austria. A semi-trailer truck with a wheel temperature exceeding 200 degrees centigrade triggered the alarm as it passed the hot spot detector. Closer inspection indicated that in addition to the overheated brake, the vehicle was also travelling with two cracked brake discs. Developed by Sick’s Swiss subsidiary ECTN and based on the Sick LMS511 laser sensor with the T
December 9, 2013 Read time: 2 mins
536 Sick’s new hot spot detector system proved its worth only one week after being installed by preventing a fire in the Karawanks Tunnel, Austria.   A semi-trailer truck with a wheel temperature exceeding 200 degrees centigrade triggered the alarm as it passed the hot spot detector.  Closer inspection indicated that in addition to the overheated brake, the vehicle was also travelling with two cracked brake discs.

Developed by Sick’s Swiss subsidiary 535 ECTN and based on the Sick LMS511 laser sensor with the TIC 102 profiling system and integrated with thermal imaging cameras, the device detects potentially dangerous situations in free-flow traffic so a suspect vehicle can be diverted before entering the tunnel.

Every vehicle greater than 7.5 tons is guided into the lane where the Hot Spot detector is sited before entering the tunnel. Here, while the vehicle is moving freely, the laser sensor measures it in 3Dm while thermal imaging cameras create a thermal profile.

The combined 3D thermal image is assessed against one of 28 categories, which each have the approved thermal thresholds for specific parts in locations appropriate to that class, including exhaust system, load, brakes, wheel bearings, engine etc.  Any significant deviation from a normal temperature will alert the tunnel police who can pull the vehicle over and implement a thorough inspection.

The all-weather IP66 protected detector operates in all weather environments and  is able to detect potentially dangerous overheating on chassis or cargo in virtually any type of vehicle, from buses and low loaders to high sided trucks and tankers.

“Some of the most calamitous disasters have happened on major highways, where a vehicle fire has trapped people in a tunnel, subject to heat and poisonous smoke, with great difficulty in escaping,” comments Gary Young, Sick (UK) traffic management segment manager.
Detection, Monitoring & Machine Vision Classification & Data Collection

For more information on companies in this article

Related Content

  • Transmax trials emergency vehicle ‘green wave’
    December 6, 2013
    Existing equipment used in Australian emergency vehicle ‘green wave’ trial. Despite the lights and sirens, accidents between the motoring public and emergency vehicles on their way to/from the scene of an incident are relatively frequent. Figures from various sources indicate that road accidents are the second most frequent cause of death for on-duty fire fighter fatalities and that more than 90% of ambulance and fire engine accidents occur when the lights are on and the sirens wailing. Other studies indica
    Read More
  • AGD launch larger zone 645 pedestrian detector
    February 22, 2018
    AGD Systems (AGD) has upgraded its 645 Pedestrian Detector to now cover a 10m x 3m zone in a standard built format to monitor new super-crossings that are being deployed internationally. The solution is said to detect people while rejecting shadows, litter leaves and other distractions. 645 processes information on board with new chip-set and algorithms for automated decision making with the intention of providing ultra-reliable detection. It utilises a 3D high definition stereo-vision optical sensor tha
    Read More
  • Haenni scales the heights
    March 29, 2022

     

    Swiss company Haenni Instruments is highlighting the WL 108 XL portable wheel load scale. Its active surface of 1395 x 393 mm is big enough to accommodate the wheels of vehicles of any size, with any axle configuration. Despite its huge weighing area, the device weighs only 28.5 kg and is equipped with rechargeable batteries that power it for at least 120 hours before it needs to be recharged.

    Read More
  • Measuring vehicle lengths with a single loop - promising results
    July 27, 2012
    District 7 of Caltrans has been conducting trials to see whether the use of a single inductive loop to measure vehicle lengths and so identify heavy trucks is feasible. So far, the results have been very promising, according to Lead Transportation Engineer Steve Malkson. Between them, the adjoining ports of Los Angeles and Long Beach, the US's two biggest, cover some 10,700 acres (43km2) and 68 miles (109km) of waterfront.
    Read More

Highlighted Content