Hot spot detector prevents road tunnel fires

Sick’s new hot spot detector system proved its worth only one week after being installed by preventing a fire in the Karawanks Tunnel, Austria. A semi-trailer truck with a wheel temperature exceeding 200 degrees centigrade triggered the alarm as it passed the hot spot detector. Closer inspection indicated that in addition to the overheated brake, the vehicle was also travelling with two cracked brake discs. Developed by Sick’s Swiss subsidiary ECTN and based on the Sick LMS511 laser sensor with the T
December 9, 2013 Read time: 2 mins
536 Sick’s new hot spot detector system proved its worth only one week after being installed by preventing a fire in the Karawanks Tunnel, Austria.   A semi-trailer truck with a wheel temperature exceeding 200 degrees centigrade triggered the alarm as it passed the hot spot detector.  Closer inspection indicated that in addition to the overheated brake, the vehicle was also travelling with two cracked brake discs.

Developed by Sick’s Swiss subsidiary 535 ECTN and based on the Sick LMS511 laser sensor with the TIC 102 profiling system and integrated with thermal imaging cameras, the device detects potentially dangerous situations in free-flow traffic so a suspect vehicle can be diverted before entering the tunnel.

Every vehicle greater than 7.5 tons is guided into the lane where the Hot Spot detector is sited before entering the tunnel. Here, while the vehicle is moving freely, the laser sensor measures it in 3Dm while thermal imaging cameras create a thermal profile.

The combined 3D thermal image is assessed against one of 28 categories, which each have the approved thermal thresholds for specific parts in locations appropriate to that class, including exhaust system, load, brakes, wheel bearings, engine etc.  Any significant deviation from a normal temperature will alert the tunnel police who can pull the vehicle over and implement a thorough inspection.

The all-weather IP66 protected detector operates in all weather environments and  is able to detect potentially dangerous overheating on chassis or cargo in virtually any type of vehicle, from buses and low loaders to high sided trucks and tankers.

“Some of the most calamitous disasters have happened on major highways, where a vehicle fire has trapped people in a tunnel, subject to heat and poisonous smoke, with great difficulty in escaping,” comments Gary Young, Sick (UK) traffic management segment manager.
Detection, Monitoring & Machine Vision Classification & Data Collection

For more information on companies in this article

Related Content

  • Øresund bridges the front line for border crossing traffic
    September 15, 2016
    Timothy Compston considers the challenges faced by the operators of the Øresund Bridge between Denmark and Sweden, the largest structure of its kind across Europe. In light of the concerns about the ongoing security threat and the unprecedented flow of migrants, many of the countries that make up the Schengen Area in Europe have re-introduced border controls. For its part, Sweden has rolled out ID checks for train, bus and ferry passengers from Denmark placing the landmark Øresund Bridge very much on the fr
    Read More
  • Semi-autonomous hybrid vehicle trials show fuel, emission savings
    July 16, 2012
    The Transport Research Laboratory has unveiled an innovative semi-autonomous vehicle prototype. It offers improves in environmental performance and safety but also displays some shortcomings. Mike Woof reports. The UK's Transport Research Laboratory (TRL) has been working on an innovative project to develop a prototype vehicle intended to reduce fuel consumption. Based on a Ford Escape hybrid model, TRL's Sentience vehicle uses a combination of mobile communications and mapping technologies to reduce fuel c
    Read More
  • Smoothing intersection flow in the Netherlands
    December 9, 2014
    Flir's ThermiCam thermal sensors have been installed at a major signalised intersection with the Utrechtseweg (N237) and Wilhelminalaan in Utrecht in the Netherlands In a bid to smooth traffic flows while also taking account of the presence of cyclists. ThermiCam is an integrated thermal camera and detector for vehicle and cycle presence detection and counting at signalised intersections and provides an alternative to in-road loops. The sensor detects heat energy generated by cyclists and motorists and
    Read More
  • In Image Triggering breakthrough
    February 3, 2012
    JAI has developed a new In Image Triggering (IIT) traffic camera system that is able to handle a wide range of advanced vehicle imaging and vehicle recognition (ANPR) applications in open road tolling, congestion charging, section speed control, parking access control, journey time and other traffic management applications.
    Read More

Highlighted Content