Hot spot detector prevents road tunnel fires

Sick’s new hot spot detector system proved its worth only one week after being installed by preventing a fire in the Karawanks Tunnel, Austria. A semi-trailer truck with a wheel temperature exceeding 200 degrees centigrade triggered the alarm as it passed the hot spot detector. Closer inspection indicated that in addition to the overheated brake, the vehicle was also travelling with two cracked brake discs. Developed by Sick’s Swiss subsidiary ECTN and based on the Sick LMS511 laser sensor with the T
December 9, 2013 Read time: 2 mins
536 Sick’s new hot spot detector system proved its worth only one week after being installed by preventing a fire in the Karawanks Tunnel, Austria.   A semi-trailer truck with a wheel temperature exceeding 200 degrees centigrade triggered the alarm as it passed the hot spot detector.  Closer inspection indicated that in addition to the overheated brake, the vehicle was also travelling with two cracked brake discs.

Developed by Sick’s Swiss subsidiary 535 ECTN and based on the Sick LMS511 laser sensor with the TIC 102 profiling system and integrated with thermal imaging cameras, the device detects potentially dangerous situations in free-flow traffic so a suspect vehicle can be diverted before entering the tunnel.

Every vehicle greater than 7.5 tons is guided into the lane where the Hot Spot detector is sited before entering the tunnel. Here, while the vehicle is moving freely, the laser sensor measures it in 3Dm while thermal imaging cameras create a thermal profile.

The combined 3D thermal image is assessed against one of 28 categories, which each have the approved thermal thresholds for specific parts in locations appropriate to that class, including exhaust system, load, brakes, wheel bearings, engine etc.  Any significant deviation from a normal temperature will alert the tunnel police who can pull the vehicle over and implement a thorough inspection.

The all-weather IP66 protected detector operates in all weather environments and  is able to detect potentially dangerous overheating on chassis or cargo in virtually any type of vehicle, from buses and low loaders to high sided trucks and tankers.

“Some of the most calamitous disasters have happened on major highways, where a vehicle fire has trapped people in a tunnel, subject to heat and poisonous smoke, with great difficulty in escaping,” comments Gary Young, Sick (UK) traffic management segment manager.
Detection, Monitoring & Machine Vision Classification & Data Collection

Related Content

  • August 6, 2013
    Monitoring, detection and control systems inside tunnels can do much to improve traveller safety
    ITS technology can do a great deal to improve tunnel safety, as Colin Sowman discovers. It was back in April 2004 that the European Parliament adopted the EU Directive which lays down the Minimum Safety Requirements for Tunnels in the Trans-European Road Network (2004/54/EC). This was the first unitary legislation setting minimum safety standards for European road tunnels and was designed to harmonise the management of tunnel safety at a national level. Operators of existing tunnels have until 30 April 201
    Read More
  • November 10, 2017
    Sony’s vision systems help limit risk in road tunnels
    Sony’s Stephane Clauss looks at the imaging requirements in tunnels. In the event of a fire inside a tunnel, the dispersion of gases and heat is prevented, creating extreme temperatures that have led to many deaths. Following tragic incidents including Mont Blanc, European legislation requires longer tunnels to be fitted with incident and smoke detection systems.
    Read More
  • January 29, 2018
    SICK launches all-weather 3D sensor system for traffic management
    Sick has launched the TIC502 Lidar sensor traffic and warning system which is said to scan vehicles up to 100 times a second with 99% accuracy to generate a 3D profile of each vehicle. The all-weather solution can be used for counting fast lane, free-flowing and static traffic to facilitate real-time management and electronic toll charge assessment of all vehicle types according to standard international transport classifications. TIC502 has a range of up to 40 metres and minimum mounting height of 1.5
    Read More
  • August 20, 2015
    New system to prevent Hazchem and over-height vehicles entering tunnel
    An impending move to free-flow charging prompted a search for automated dangerous goods identification and over-height detection systems at the Thames Crossing to the east of London. Manned toll booths are increasingly being consigned to history by the onslaught of all-electronic charging. However, a secondary function of the traditional manned plazas has been to prevent non-compliant vehicles using the facility or to tell a driver that that they need to use a specific lane or wait for an escort. Automating
    Read More

Highlighted Content