Skip to main content

360 truck screening technology offers safety and revenue

Data collected by the Montana Department of Transportation using Help’s 360SmartView truck safety screening system show significant results from focusing limited enforcement resources on trucks that are out of compliance with safety and credential requirements. The results, based on data from the 360SmartView system during the first year of operation at Montana’s westbound Billings inspection facility, include: a 23 percent increase in violations detected per inspection; a 25 percent increase in inspected v
April 24, 2013 Read time: 2 mins
Data collected by the 7318 Montana Department of Transportation using Help’s 360SmartView truck safety screening system show significant results from focusing limited enforcement resources on trucks that are out of compliance with safety and credential requirements.

The results, based on data from the 360SmartView system during the first year of
operation at Montana’s westbound Billings inspection facility, include: a 23 percent increase in violations detected per inspection; a 25 percent increase in inspected vehicles falling within FMCSA’s “Inspect” category; and increases in revenue from temporary fuel and vehicle registration permit sales of 55 and 88 percent.

360SmartView is a new cloud-based, truck-sorting system for roadside weigh stations and mobile enforcement. A core, in-station offering, 360SmartView provides state enforcement officials with a single and complete view of each truck’s safety and compliance status, enabling them to make selection decisions based on a 360-view of each vehicle.  360SmartView can be deployed at fixed, staffed inspection facilities or at remote, unstaffed locations and be accessed by officers assigned to mobile enforcement.

The system deployed in Montana uses in-station cameras to electronically screen all trucks entering the inspection facility. The system presents roadside enforcement officials with a compliance snapshot based on cloud-based information from the U.S. Department of Transportation and as many as ninety other government data sources.

“360SmartView is good for Montana. The results are significant at our fixed inspection facilities.  We believe that use of the system in remote and virtual deployments will produce similar results,” commented Dennis Hult, Operations Bureau Chief, Montana Department of Transportation, while Lieutenant Russ Christoferson, Motor Carrier Services Officer, Billings, Montana, said “360SmartView helps us work smarter, not harder. It identifies compliance deficiencies for our site officers in a simple one-screen snapshot, rather than requiring them to check multiple government data sources.”

For more information on companies in this article

Related Content

  • SeeDOT spots trucking transgressors
    June 1, 2015
    SeeDOT, from vehicle recognition specialist HTS, uses multiple 2MP IP imaging units with customised visible, near and invisible synchronised illumination to automatically monitor commercial vehicles entering and exiting controlled areas such as Ports of Entry, border crossings and weigh-in-motion stations. The system is said to operate effectively at both moderate and high speeds in mainline, virtual and ramp applications to capture details including DOT, LPR, Overview, KYU and Jurisdiction. HTS says Se
  • ITS technology reduces congestion, improves workzone safety
    July 17, 2012
    As the road-building season gets under way in the US, the Federal Highway Administration has just published a White Paper which deals with the use of ITS technology in work zones. On 30 April 2009, the US Federal Highway Administration (FHWA) published a White Paper which was prepared by the US Department of Transportation (USDOT) to inform public agencies about the use of ITS to manage construction work zones. This is a particularly relevant topic given the large number of construction projects that are ex
  • Communications for cooperative infrastructures and safety
    February 2, 2012
    Scott Andrews of Cogenia Partners, LLC details the findings of the VII Proof Of Concept work carried out to verify the effectiveness of 5.9GHz-based communication for future US cooperative infrastructures
  • European tunnel upgrades following new safety legislation
    August 20, 2015
    Across Europe there is a very mixed picture of compliance to latest safety standards for road tunnels. Best practice has emerged, however, in the wake of European legislation. Jon Masters reports High profile fatal fires following accidents in the Mont Blanc, Tauern and Gotthard tunnels prompted the 2004 European Union Directive 2004/54 on road tunnel safety. This meant all EU member states would have to meet new standards of safety in road tunnels by 30 April 2014. The Directive applied to all tunnels over