Skip to main content

Traffic sensors give cyclists green lights

Transport officials in Columbus, Ohio, are following in the footsteps of Austin, Texas; Portland, Oregon and Berkeley, California and recalibrating their traffic signal sensors to accommodate the growing number of cyclists in the city. Nearly all the city’s 1,000 traffic lights are connected to road sensors that detect the presence of vehicles at the intersections and adjust the lights accordingly. Cycles are another story; they don’t contain enough metal to trigger the sensor. This has caused some cyclis
February 1, 2013 Read time: 2 mins
Transport officials in Columbus, Ohio, are following in the footsteps of Austin, Texas; Portland, Oregon and Berkeley, California and recalibrating their traffic signal sensors to accommodate the growing number of cyclists in the city.

Nearly all the city’s 1,000 traffic lights are connected to road sensors that detect the presence of vehicles at the intersections and adjust the lights accordingly. Cycles are another story; they don’t contain enough metal to trigger the sensor.  This has caused some cyclists to even run a red light that doesn’t change.

“It’s a big safety issue,” said Ray George, president of Yay Bikes, a Columbus organisation that advocates for cyclists. “It’s not the best situation for anybody.”

But local cycling advocates are giving the city high marks for what they say is a stepped-up response to their concerns.

Calls to 311, the city’s service line, and online requests at the 311 website will result in the city checking out a particular intersection and possibly recalibrating the sensors to detect bicycles.

“It’s been a process of going intersection by intersection for a while now,” said Rick Tilton, assistant director of the city’s public-service department.  Since February 2012, Columbus has made improvements at about forty-five intersections, Tilton said.

Gordon Renkes, an Ohio State University chemist who has been a certified instructor with the League of American Bicyclists for more than fifteen years, said the response has been a welcome improvement, especially for cyclists.

“This is one of the simplest, easiest and least-expensive things the city and traffic departments can do to help lawful cyclists,” Renkes said.

The technique is recommended by the National Association of City Transportation Officials as a way to reduce delays for cyclists while increasing safety and promoting cycling as a viable form of transportation in cities.

“We’re working with the cycling community, and Mayor Coleman wants to make this a more cycle-friendly city,” Tilton said.

Related Content

  • Car-free zones part of London 'reimagining'
    May 18, 2020
    Parts of central London will become “one of the largest car-free zones in any capital city in the world”, according to the city’s mayor Sadiq Khan.
  • Cycling in London grows by ten per cent
    February 2, 2015
    London’s cycling revolution accelerated last year, with 2014 seeing new records for usage of the capital’s cycle hire scheme and overall cycling on the Transport for London (TfL) road network. Across the TfL road network, London’s main roads, cycling levels in quarter 3 of 2014/15 (14 September to 6 December) were ten per cent higher than in the same quarter the previous year and the highest since records began in 2000. It was the fifth record quarter in a row. By the end of 2014/15, TfL forecasts a 12 p
  • AAA report: caught red-handed
    February 17, 2020
    Using published crash statistics, the AAA Foundation for Traffic Safety’s report found that 939 people were killed in red-light running crashes in 2017 – a rise of 28% since 2012. Moreover, more than a quarter (28%) of crash deaths at signalised intersections “are the result of a driver running through a red light”.
  • Flir showcases new TrafiOne smart city wireless sensor
    June 3, 2016
    Flir Systems will be launching the Flir TrafiOne Smart City Sensor, an all-round detection sensor for traffic monitoring and dynamic traffic signal control. Offered in a compact and easy-to-install package, the system uses thermal imaging and wi-fi technology to provide traffic engineers with high-resolution data on vehicles, bicycles and pedestrians at intersections and in urban environments. The Flir TrafiOne sensor uses thermal imaging to detect the presence of pedestrians and cyclists who are approac