Skip to main content

Traffic sensors give cyclists green lights

Transport officials in Columbus, Ohio, are following in the footsteps of Austin, Texas; Portland, Oregon and Berkeley, California and recalibrating their traffic signal sensors to accommodate the growing number of cyclists in the city. Nearly all the city’s 1,000 traffic lights are connected to road sensors that detect the presence of vehicles at the intersections and adjust the lights accordingly. Cycles are another story; they don’t contain enough metal to trigger the sensor. This has caused some cyclis
February 1, 2013 Read time: 2 mins
Transport officials in Columbus, Ohio, are following in the footsteps of Austin, Texas; Portland, Oregon and Berkeley, California and recalibrating their traffic signal sensors to accommodate the growing number of cyclists in the city.

Nearly all the city’s 1,000 traffic lights are connected to road sensors that detect the presence of vehicles at the intersections and adjust the lights accordingly. Cycles are another story; they don’t contain enough metal to trigger the sensor.  This has caused some cyclists to even run a red light that doesn’t change.

“It’s a big safety issue,” said Ray George, president of Yay Bikes, a Columbus organisation that advocates for cyclists. “It’s not the best situation for anybody.”

But local cycling advocates are giving the city high marks for what they say is a stepped-up response to their concerns.

Calls to 311, the city’s service line, and online requests at the 311 website will result in the city checking out a particular intersection and possibly recalibrating the sensors to detect bicycles.

“It’s been a process of going intersection by intersection for a while now,” said Rick Tilton, assistant director of the city’s public-service department.  Since February 2012, Columbus has made improvements at about forty-five intersections, Tilton said.

Gordon Renkes, an Ohio State University chemist who has been a certified instructor with the League of American Bicyclists for more than fifteen years, said the response has been a welcome improvement, especially for cyclists.

“This is one of the simplest, easiest and least-expensive things the city and traffic departments can do to help lawful cyclists,” Renkes said.

The technique is recommended by the National Association of City Transportation Officials as a way to reduce delays for cyclists while increasing safety and promoting cycling as a viable form of transportation in cities.

“We’re working with the cycling community, and Mayor Coleman wants to make this a more cycle-friendly city,” Tilton said.

Related Content

  • Traffic roundabouts, a steep learning curve
    October 1, 2014
    Drivers in the UK are very familiar with the concept of traffic roundabouts at intersections, which are designed to keep traffic moving more efficiently than a traditional signal-controlled intersection. However, according to a report on the US Government Executive website, drivers in some parts of the US don’t understand them. In Oakland County, just outside Detroit, some roundabouts have seen big spikes in crashes and property damage since they were built, but the severity of those accidents has been
  • Siemens' sensor offers lane-wide cyclists detection
    June 12, 2015
    Siemens has introduced a microwave radar-based cycle detector called WiMag. The sensor is buried in the road surface and covers a 3m wide lane which the company said means that unlike loops, the cyclist does not have to pass directly over the sensor to be identified. It is secured in a 100mm diameter core-drilled hole using silicone sealant, has a minimum five-year battery life and transmits to repeaters at a distance of up to 30m. The sensor can now be used to detect the presence of bicycles, provide count
  • Small toll agency adopts big city thinking
    December 5, 2014
    Andrew Bardin Williams looks at a novel option for new toll road authorities. While somewhat politically controversial, outsourcing has gained traction in the business world as a model worth investigating for its efficiency and cost saving benefits. Lean start-ups tend to employ independent contractors instead of full-time employees in an effort to remain flexible and avoid costs associated with pensions, retirement places, health insurance, office space and benefit packages.
  • Yutraffic awareAI deployed in Swiss capital
    January 29, 2025
    City of Bern’s project involves installation at two traffic light systems