Skip to main content

Traffic sensors give cyclists green lights

Transport officials in Columbus, Ohio, are following in the footsteps of Austin, Texas; Portland, Oregon and Berkeley, California and recalibrating their traffic signal sensors to accommodate the growing number of cyclists in the city. Nearly all the city’s 1,000 traffic lights are connected to road sensors that detect the presence of vehicles at the intersections and adjust the lights accordingly. Cycles are another story; they don’t contain enough metal to trigger the sensor. This has caused some cyclis
February 1, 2013 Read time: 2 mins
Transport officials in Columbus, Ohio, are following in the footsteps of Austin, Texas; Portland, Oregon and Berkeley, California and recalibrating their traffic signal sensors to accommodate the growing number of cyclists in the city.

Nearly all the city’s 1,000 traffic lights are connected to road sensors that detect the presence of vehicles at the intersections and adjust the lights accordingly. Cycles are another story; they don’t contain enough metal to trigger the sensor.  This has caused some cyclists to even run a red light that doesn’t change.

“It’s a big safety issue,” said Ray George, president of Yay Bikes, a Columbus organisation that advocates for cyclists. “It’s not the best situation for anybody.”

But local cycling advocates are giving the city high marks for what they say is a stepped-up response to their concerns.

Calls to 311, the city’s service line, and online requests at the 311 website will result in the city checking out a particular intersection and possibly recalibrating the sensors to detect bicycles.

“It’s been a process of going intersection by intersection for a while now,” said Rick Tilton, assistant director of the city’s public-service department.  Since February 2012, Columbus has made improvements at about forty-five intersections, Tilton said.

Gordon Renkes, an Ohio State University chemist who has been a certified instructor with the League of American Bicyclists for more than fifteen years, said the response has been a welcome improvement, especially for cyclists.

“This is one of the simplest, easiest and least-expensive things the city and traffic departments can do to help lawful cyclists,” Renkes said.

The technique is recommended by the National Association of City Transportation Officials as a way to reduce delays for cyclists while increasing safety and promoting cycling as a viable form of transportation in cities.

“We’re working with the cycling community, and Mayor Coleman wants to make this a more cycle-friendly city,” Tilton said.

Related Content

  • Bringing enforcement standards into line
    March 1, 2013
    Difficulties with the apparent accuracy of enforcement systems have been making the headlines in the United States over recent months. Jon Masters investigates the causes and possible cures. Online newspaper reports in the United States over recent months have painted a picture of the authorities struggling to keep on top of their speed and red light enforcement pro­grammes. Among a host of stories put out by the Washington Post and others on the subject of speed cameras during January, there were reports
  • Traffic lights: There’s a better way ..
    July 9, 2014
    .. say researchers at Massachusetts Institute of Technology (MIT) who have developed a means of computing optimal timings for city stoplights that they say can significantly reduce drivers’ average travel times. Existing software for timing traffic signals has several limitations, says Carolina Osorio, an assistant professor of civil and environmental engineering at MIT and lead author of a forthcoming paper in the journal Transportation Science that describes the new system, based on a study of traffic
  • Iteris introduces SmartCycle and Vantage Vector Hybrid
    April 5, 2016
    Iteris is using Intertraffic to introduce two important safety innovations. The first is a new video-based bicycle detection system, SmartCycle, which the company says has the unique capability of distinguishing bicycles from other vehicles on the road in any lane. This process provides a special output that is sent to the traffic controller to extend the green time when bicycles are detected, allowing them to safely cross the intersection before the light changes. “Cycling is a way of life in Amsterd
  • Flir showcases ThermiCam innovation
    October 6, 2015
    In addition to its field-proven solutions for automatic incident detection and urban traffic monitoring, Flir Intelligent Transportation Systems is here at the ITS World Congress to present several innovations to visitors. ThermiCam is an integrated thermal camera and detector for vehicle and bike detection that does not need light to operate, but uses the thermal energy emitted from vehicles and bicyclists to make a distinction between both.