Skip to main content

Traffic sensors give cyclists green lights

Transport officials in Columbus, Ohio, are following in the footsteps of Austin, Texas; Portland, Oregon and Berkeley, California and recalibrating their traffic signal sensors to accommodate the growing number of cyclists in the city. Nearly all the city’s 1,000 traffic lights are connected to road sensors that detect the presence of vehicles at the intersections and adjust the lights accordingly. Cycles are another story; they don’t contain enough metal to trigger the sensor. This has caused some cyclis
February 1, 2013 Read time: 2 mins
Transport officials in Columbus, Ohio, are following in the footsteps of Austin, Texas; Portland, Oregon and Berkeley, California and recalibrating their traffic signal sensors to accommodate the growing number of cyclists in the city.

Nearly all the city’s 1,000 traffic lights are connected to road sensors that detect the presence of vehicles at the intersections and adjust the lights accordingly. Cycles are another story; they don’t contain enough metal to trigger the sensor.  This has caused some cyclists to even run a red light that doesn’t change.

“It’s a big safety issue,” said Ray George, president of Yay Bikes, a Columbus organisation that advocates for cyclists. “It’s not the best situation for anybody.”

But local cycling advocates are giving the city high marks for what they say is a stepped-up response to their concerns.

Calls to 311, the city’s service line, and online requests at the 311 website will result in the city checking out a particular intersection and possibly recalibrating the sensors to detect bicycles.

“It’s been a process of going intersection by intersection for a while now,” said Rick Tilton, assistant director of the city’s public-service department.  Since February 2012, Columbus has made improvements at about forty-five intersections, Tilton said.

Gordon Renkes, an Ohio State University chemist who has been a certified instructor with the League of American Bicyclists for more than fifteen years, said the response has been a welcome improvement, especially for cyclists.

“This is one of the simplest, easiest and least-expensive things the city and traffic departments can do to help lawful cyclists,” Renkes said.

The technique is recommended by the National Association of City Transportation Officials as a way to reduce delays for cyclists while increasing safety and promoting cycling as a viable form of transportation in cities.

“We’re working with the cycling community, and Mayor Coleman wants to make this a more cycle-friendly city,” Tilton said.

Related Content

  • Kapsch: We need to move quicker towards connectivity
    July 27, 2023
    Connectivity requires a lot of different parties to work together – but it’s the only way to get coverage. Alfredo Escribá, chief technology officer of Kapsch, talks to Adam Hill about the value of ‘orchestrated corridors’
  • TfL trials cyclist detection
    June 5, 2015
    New world first trials would allow TfL to better cater for cyclists at key junctions Further on-street trials will take place later this year TfL now given blanket approval from DfT to install low-level cycle signals at junctions Transport for London (TfL) is to trial a new technology that will help give cyclists more time on green lights.
  • Verra and Redflex: what happens now?
    August 16, 2021
    Verra Mobility has bought Redflex; Mark Talbot, who used to run Redflex and is now Verra’s head of government solutions, explains what happens next
  • The benefits of combining enforcement and traffic management
    February 27, 2013
    Jason Barnes considers how combining enforcement equipment with other traffic management technologies might benefit our future – if only the will were really in place to do so. During the ITS World Congress in Vienna in October last year, Navtech Radar and Vysion­ics ITS announced a strategic partnership that would combine the expertise of Navtech in millimetre-wave wide-area surveillance technology with Vysionics’ machine vision-based automatic number plate recognition (ANPR) and average speed measurement