Skip to main content

Traffic sensors give cyclists green lights

Transport officials in Columbus, Ohio, are following in the footsteps of Austin, Texas; Portland, Oregon and Berkeley, California and recalibrating their traffic signal sensors to accommodate the growing number of cyclists in the city. Nearly all the city’s 1,000 traffic lights are connected to road sensors that detect the presence of vehicles at the intersections and adjust the lights accordingly. Cycles are another story; they don’t contain enough metal to trigger the sensor. This has caused some cyclis
February 1, 2013 Read time: 2 mins
Transport officials in Columbus, Ohio, are following in the footsteps of Austin, Texas; Portland, Oregon and Berkeley, California and recalibrating their traffic signal sensors to accommodate the growing number of cyclists in the city.

Nearly all the city’s 1,000 traffic lights are connected to road sensors that detect the presence of vehicles at the intersections and adjust the lights accordingly. Cycles are another story; they don’t contain enough metal to trigger the sensor.  This has caused some cyclists to even run a red light that doesn’t change.

“It’s a big safety issue,” said Ray George, president of Yay Bikes, a Columbus organisation that advocates for cyclists. “It’s not the best situation for anybody.”

But local cycling advocates are giving the city high marks for what they say is a stepped-up response to their concerns.

Calls to 311, the city’s service line, and online requests at the 311 website will result in the city checking out a particular intersection and possibly recalibrating the sensors to detect bicycles.

“It’s been a process of going intersection by intersection for a while now,” said Rick Tilton, assistant director of the city’s public-service department.  Since February 2012, Columbus has made improvements at about forty-five intersections, Tilton said.

Gordon Renkes, an Ohio State University chemist who has been a certified instructor with the League of American Bicyclists for more than fifteen years, said the response has been a welcome improvement, especially for cyclists.

“This is one of the simplest, easiest and least-expensive things the city and traffic departments can do to help lawful cyclists,” Renkes said.

The technique is recommended by the National Association of City Transportation Officials as a way to reduce delays for cyclists while increasing safety and promoting cycling as a viable form of transportation in cities.

“We’re working with the cycling community, and Mayor Coleman wants to make this a more cycle-friendly city,” Tilton said.

Related Content

  • Growth of outsourcing simplifies transportation operations
    June 11, 2012
    Xerox Chairman and CEO Ursula Burns will deliver the keynote address at the opening plenary of ITS America’s 2012 Annual Meeting in May. She talked to ITS International about the acquisition of ACS, its rebranding and the importance of the transportation sector to Xerox
  • Parking expert: end Monopoly's Free Parking!
    November 25, 2020
    Players should pay if they land on board game square, says Professor Donald Shoup
  • GTT introduces Canoga 9004 traffic sensing system
    April 6, 2016
    GTT - Global Traffic Technologies – is introducing its new Canoga 9004 traffic sensing solution here at Intertraffic Amsterdam. The system is able to simultaneously detect bicycles and vehicles and gives traffic engineers the data they need to make informed decisions regarding traffic flow. Engineers can design bike-friendly corridors even when dangerous, mixed-vehicle traffic exists, says GTT CEO Doug Roberts.
  • Stars and autostripes
    September 12, 2014
    Transport engineers and planners in the USA and Australia are set to benefit from innovative road striping and traffic management design software previously only available in the UK. UK company Keysoft Solutions’ new AutoStripe application has been developed by Keysoft Solutions to enable users to design road markings quickly and efficiently in AutoCAD. AutoStripe is based on the developers’ popular KeyLines software extensively used in the UK but has been adapted specifically to comply with North Ame