Skip to main content

Qatar tests overheight vehicle detectors

The first over-height vehicle detection system (OVDS) in Qatar has been launched at the Duhail intersection in Doha. The new system will help provide greater control over trucks and protect bridges and tunnels, the Public Works Authority (Ashghal) said yesterday. The system is operated and controlled by the traffic signal control room (TSCR) at Ashghal. The OVDS uses integrated sensors or height detectors, electronic message board and CCTV, to detect vehicles that violate the maximum permitted height of
January 6, 2014 Read time: 2 mins
The first over-height vehicle detection system (OVDS) in Qatar has been launched at the Duhail intersection in Doha.  The new system will help provide greater control over trucks and protect bridges and tunnels, the Public Works Authority (5840 Ashghal) said yesterday.

The system is operated and controlled by the traffic signal control room (TSCR) at Ashghal. The OVDS uses integrated sensors or height detectors, electronic message board and CCTV, to detect vehicles that violate the maximum permitted height of 5.5 metres before entering tunnels, or passing under bridges. In the event of any over-height vehicle trying to enter the interchange, the system will alert the vehicle through a siren audible at the site, followed by a multi-lingual text message that appears on the electronic board at the site.

At the same time, the traffic signal at the approach will be changed to red by the control room to prevent the vehicle from entering the interchange. If the vehicle ignores the warnings, the control room will immediately contact the traffic department to take steps to prevent the vehicle from entering the interchange.

Ashghal’s Road Operation and Maintenance Department is looking at the possibility of introducing the OVDS at more intersections across Doha.

Related Content

  • Integrate systems to reduce roadside infrastructure
    January 27, 2012
    David Crawford reviews promising current developments. Instrumentation of the road infrastructure has grown to become one of the most dynamic sectors of the ITS industry. Drivers for its deployment include global concerns over the commercial and environmental pressures of traffic congestion, the importance of keeping drivers informed throughout their journeys, and the need to reduce accident rates and promote the safety of all road users, for example by enforcing traffic safety rules.
  • High-speed WIM moves onto the main highway
    May 24, 2016
    High-speed weigh-in-motion is starting to make its mark on both sides of the Atlantic. As a transit country the Czech Republic experiences a large number of overloaded vehicles, which greatly increase highway maintenance costs. This prompted its Transport Ministry to trial an extension of the capabilities of the existing truck tolling system to allow the dynamic high-speed weighing of cargo vehicles. In effect the tolling enforcement gantries become weigh-in-motion (WIM) locations.
  • Weigh in Motion gets smarter
    January 4, 2023
    Weigh in Motion technology is at the forefront of protecting road surfaces and helping enforcement activity – but could it also play a key role in the development of Smart Cities?
  • A journey into the Dilemma Zone with Econolite
    January 16, 2025
    Indecision on the road can kill. Econolite’s Sunny Chakravarty and Vincent Mayeda present new data-driven dilemma zone and intersection safety strategies for a Vision Zero future