Highways Agency approval for Clearview Traffic

Clearview Traffic Group has gained formal Highways Agency Type Approval for its M100 sensors and M150 interface card to be used as a viable alternative to inductive loops for Motorway Incident Detection and Automatic Signalling (MIDAS) applications, having met the rigorous performance and assessment requirements of the Highways Agency MCH1529 standard.
June 3, 2014 Read time: 2 mins
557 Clearview Traffic Group has gained formal 503 Highways Agency Type Approval for its M100 sensors and M150 interface card to be used as a viable alternative to inductive loops for Motorway Incident Detection and Automatic Signalling (MIDAS) applications, having met the rigorous performance and assessment requirements of the Highways Agency MCH1529 standard.

The wireless vehicle detection system uses embedded in-road magnetometer M100 sensors to detect the presence and lane occupancy of vehicles, providing a more reliable, lower cost and easy to install alternative to traditional inductive loops. For MIDAS applications the M100 sensors, two per lane at standard 4.5m spacing, are used in conjunction with the M150 interface card that is specifically designed to be compatible with every type of MIDAS outstation in use on the network today.

Nick Lanigan, managing director of Clearview Traffic, says “This seal of approval from the Highways Agency is a great boost for the company and acknowledges the hard work we have done to deliver a new solution to market that paves the way for much lower cost MIDAS deployments.”
Detection, Monitoring & Machine Vision Classification & Data Collection Networking & Communication Systems

For more information on companies in this article

Related Content

  • Combining Bluetooth and wi-fi to optimise traffic signals
    May 8, 2013
    Optimisation of traffic signals is often seen as a challenging and expensive task, requiring inductive loops, cameras or manual counting for traffic monitoring. However, a new development from Danish wireless technology company Blip Systems aims to change that. BlipTrack uses a combination of Bluetooth and wi-fi to constantly monitor and map traffic flow. The system detects all vehicles containing Bluetooth or wi-fi enabled devices to provide accurate traffic data, enabling real-time traffic monitoring a
    Read More
  • New ANPR solutions overcome variables
    May 18, 2018
    The sheer range of variables makes it difficult to find a single algorithm to ensure a 100% standard of ANPR. David Crawford investigates new processing technology. Automatic number plate recognition (ANPR), using optical character recognition and image-processing to identify vehicles, plays key roles in traffic monitoring and law enforcement, access and parking control, electronic toll collection, vehicle security and crime deterrence. Overall, system performance is well rated, with high levels of
    Read More
  • Developments in urban traffic management and control
    February 1, 2012
    Mark Cartwright, Centaur Consulting, discusses developments in urban traffic management and control. Despite the concept of UTMC (Urban Traffic Management and Control) having been around for some years now, there remains a significant rump of confusion as to its relationship with its similar-sounding cousin UTC (Urban Traffic Control). To many people, the two are one and the same. However, this is not the case.
    Read More
  • Sensebit shows FLEX vehicle sensor
    April 5, 2016
    Swedish company Sensebit is showing its new FLEX vehicle sensor, a standalone device with integrated battery and modem that requires no roadside installation. The sensor is installed in the centre of the lane to be measured and is managed remotely.
    Read More

Highlighted Content