Skip to main content

Highways Agency approval for Clearview Traffic

Clearview Traffic Group has gained formal Highways Agency Type Approval for its M100 sensors and M150 interface card to be used as a viable alternative to inductive loops for Motorway Incident Detection and Automatic Signalling (MIDAS) applications, having met the rigorous performance and assessment requirements of the Highways Agency MCH1529 standard.
June 3, 2014 Read time: 2 mins
557 Clearview Traffic Group has gained formal 503 Highways Agency Type Approval for its M100 sensors and M150 interface card to be used as a viable alternative to inductive loops for Motorway Incident Detection and Automatic Signalling (MIDAS) applications, having met the rigorous performance and assessment requirements of the Highways Agency MCH1529 standard.

The wireless vehicle detection system uses embedded in-road magnetometer M100 sensors to detect the presence and lane occupancy of vehicles, providing a more reliable, lower cost and easy to install alternative to traditional inductive loops. For MIDAS applications the M100 sensors, two per lane at standard 4.5m spacing, are used in conjunction with the M150 interface card that is specifically designed to be compatible with every type of MIDAS outstation in use on the network today.

Nick Lanigan, managing director of Clearview Traffic, says “This seal of approval from the Highways Agency is a great boost for the company and acknowledges the hard work we have done to deliver a new solution to market that paves the way for much lower cost MIDAS deployments.”

Related Content

  • March 16, 2018
    Optex to exhibit Viik vehicle detectors at Intertraffic 2018
    Optex will showcase two above ground ViiK vehicle detectors in Europe, Middle East and Africa at Intertraffic, in Amsterdam. The solutions are said to be ideal for sites where ground loops cannot be installed, such as where the road surface is damaged, unsealed, paved with cobblestones or above drains or pipes. The OVS-01GT is said to be designed for gate, barrier or industrial door activation and combines microwave with ultrasonic technology to sense a vehicle’s movement and presence. It is suited for
  • October 21, 2013
    UK Highways Agency approval for Aldis GridSmart
    US-based detection technology company Aldis has received UK Highways Agency approval for its 3D vision-based vehicle and pedestrian detection system with tracking for traffic signal control and data collection. Aldis GridSmart replaces in-road detection technology with a single, static 3D camera at signal controlled junctions. The system can also be used for multi-directional traffic surveys, including complex turning movements and vehicle classification, as well as pedestrian detection and counting.
  • January 30, 2012
    UTMC ANPR communications protocol aids traffic management
    Telematics Technology's Peter Billington describes the effort to give English local authorities and police forces a UTMC ANPR open communication protocol. The story of the impact of communication protocols on the development and utilisation of intelligent equipment is a familiar one both inside and outside the ITS industry. At the outset, a company pioneering its latest technology invariably develops a proprietary protocol. This enables the company's products to talk to the customer systems which need to a
  • May 30, 2013
    Wavetronix radar-based traffic sensor cuts costs
    While initial cost of radar based detection may be higher than that traditional loops, lower maintenance costs more than balance the books. Following successful field tests, the US city of Greenville, North Carolina, has recently agreed a new policy of phasing in Wavetronix traffic sensor technology’s radar-based SmartSensor Matrix system across its signalised traffic intersections. City traffic engineer Rik DiCesare expects the incremental implementation to deliver benefits to both the city’s taxpayers an