Skip to main content

AVT cameras, part of a new generation of ETC

Allied Vision Technologies (AVT) has supplied Norwegian company Q-Free with its high performance machine vision cameras for use in electronic toll collection (ETC) systems. Q-Free has developed an ETC installation based on a single gantry which relies on the latest machine imaging systems, radio systems and automatic license plate recognition (ALPR) software technologies to collect toll data. This versatile system is designed to do pure video tolling or a combination of video and radio tolling depending
August 20, 2015 Read time: 3 mins
518 Allied Vision Technologies (AVT) has supplied Norwegian company 108 Q-Free with its high performance machine vision cameras for use in electronic toll collection (ETC) systems.

Q-Free has developed an ETC installation based on a single gantry which relies on the latest machine imaging systems, radio systems and automatic license plate recognition (ALPR) software technologies to collect toll data. This versatile system is designed to do pure video tolling or a combination of video and radio tolling depending on the needs of the responsible authorities where it is installed.

The gantry currently features two AVT Prosilica GX1920 digital cameras per lane and on both sides of the gantry to capture high quality images of a vehicle’s front and rear license plates. In addition, the single gantry also features two AVT Manta G-125B monochrome cameras per lane. These cameras are used to track each individual vehicle as they enter and leave the detection zone around the gantry, and when a lane change occurs. Accurate vehicle tracking ensures that front and rear pictures of vehicles license plates are reliably captured in all lighting and weather conditions, as well as in situations ranging from urban environments to multi-lane free-flow highway infrastructures. The combination of accurate vehicle tracking and the machine vision cameras’ superior image quality output guarantees a high ALPR accuracy rate.

The gantry also features DSRC units to electronically collect fees from vehicles equipped with transponders, a Sick LMS500 3D laser to classify vehicles and Q-Free’s Intrada ALPR software for automatically reading the registration numbers from the pictures. The ALPR data is then processed by an operational back office for fee charging and subsequent billing by the local authorities based on each vehicle’s road usage and the tariff in charge. The video tracking ability is used to reliably integrate the input for all these sensors into single transactions.  

According to AVT, machine vision cameras offer many benefits for tolling and outdoor imaging applications due to a wide array of advanced features such as low-latency trigger for timely image capture, flexible exposure, gain and binning modes to adapt to any outdoor lighting conditions, high sensitivity to minimise motion blur and image distortion, as well as configurable I/O to synchronise the image-capture process with traffic system peripherals such as IR lights, ground loops, radar or laser triggers.

Related Content

  • January 24, 2017
    Harnessing the strengths of CMOS for ITS applications
    Sony’s Arnaud Destruels explains the benefits of CMOS sensors for ITS applications. In the transport sector roadside, trackside and platform cameras were devices for viewing and assessing a situation while individual sensors did all the clever stuff like traffic counting, speed calculation, queue lengths, signal status and so on. Well, not any more.
  • February 6, 2014
    Vitronic showcases enforcement, toll solutions, ANPR at Intertraffic
    Germany-headquartered Vitronic will use Intertraffic Amsterdam 2014 to present its latest developments in speed and red light enforcement, electronic toll collection and ANPR, all based on laser scanners (LIDAR). According to the company, PoliScanspeed and PoliScanredlight provide reliable, innovative speed and red light enforcement capturing up to three times more violators than conventional systems. PoliScanspeed systems are available as stationary devices, cased in the pillared City Design Housing, or m
  • June 17, 2016
    Joining old and new in Canada’s Highway 407
    David Arminas visits Canada’s Highway 407 ETR to see how the concession is working and hear about new arrangements for the roadway’s extension. The Toronto region is North America’s eighth largest metropolitan area and its roads become notoriously congested. In 1997 Highway 407, a 68km concrete toll motorway which skirts the northern edge of Toronto, was opened and initially operated by the province and CHIC - a consortium of four leading Ontario-based companies. Finance came from the Ontario Financing Auth
  • November 13, 2012
    Traffic to flow freely over world’s widest bridge
    Pete Goldin reports on a new Egis project in Canada, providing open road tolling operations for the widest bridge in the world. A bridge can present a bottleneck in a system of roads or it can support the smooth and unobstructed flow of traffic. Much depends on the bridge design, surrounding infrastructure and tolling system. By adding lanes and deploying open road tolling (ORT), the new Port Mann Bridge located in the metropolitan Vancouver area in British Columbia, will alleviate congestion at one of the