Skip to main content

Safelane automates work zone perimeter guarding

The safety of workers during road closures and working alongside, or above, live lanes is becoming an automated process. Ten workers suffered major injuries while working on or near motorways and major A roads in England in 2013, and between 2009 and 2013 eight had been killed. It was against that background that the first commercial application Safelane, the automated traffic management system designed to detect work zone incursions, was carried out during the temporary closure of a motorway.
June 12, 2015 Read time: 4 mins
Safelane’s combination of perimeter guarding and variable message signs proved its worth during a full motorway closure.

The safety of workers during road closures and working alongside, or above, live lanes is becoming an automated process.

Ten workers suffered major injuries while working on or near motorways and major A roads in England in 2013, and between 2009 and 2013 eight had been killed. It was against that background that the first commercial application 7363 Safelane, the automated traffic management system designed to detect work zone incursions, was carried out during the temporary closure of a motorway.

Developed by a partnership between 6918 Mobile Visual Information Systems and ITS technology firm Highways Resource Solutions, the system combines the Intellicone electronic perimeter monitoring and variable message signs (VMS) to boost work zone safety and reduce the number of workers in the danger zone guarding the perimeter.

7364 Intellicone sensors are placed on each of the cones used for temporary closures and if they are moved a signal is sent to an alarm to alert personnel in the work zone. In the Safelane application, a VMS message is wirelessly triggered to alert the errant driver before they reach the workers. 

Traffic management firm Chevron deployed Safelane to manage the full closure of the M56 between junctions 5 and 6 over a weekend, to allow a 1,500tonne bridge to be lifted into place to improve access to Manchester Airport. This required directing vehicles off the motorway and preventing other road users joining the motorway at four closure points using VMS with live streaming CCTV mounted on the same platforms.

The VMS were surrounded by HRS’ Intellicone intelligent cone barriers and contactless sensors to detect breaches and during the closure VMS messages warned around 170,000 motorists they were approaching the work zone, of the road closure ahead, and of the CCTV surveillance.

This solution meant that only two personnel per shift were deployed on perimeter guarding duties (compared with six for traditional methods), minimising the number of workers in high-risk locations. 

There was one work zone breach, lower than Chevron would normally expect, which occurred when a motorcycle passed between two cones at an unmanned location triggering the alarm. Simultaneously, the gatemen positioned at checkpoint locations received an automatic audible alarm alerting them to the incursion and enabling them to stop the vehicle. The CCTV camera recorded the incident which can be used in any follow-up action as required.

Each gatemen had a manual panic alarm if they needed to warn the workforce of an incursion. The inclusion of a human element in the fully automatic system was to ensure that the more than 100 workers were alerted only when necessary and so prevent unnecessary disruptions which can lead to workers ignoring the alarms.

8143 Chevron’s area manager, John Walls said: “While improving the safety of our workers, we saved four men and four vehicles per shift.  Previously we used six men and six vehicles per shift but, with the new kit in place, this was reduced to two of each per shift and we covered all closure points.

“The VMS element improved the information available to road users negotiating the roadworks.”

Added MVIS’ managing director, Pat Musgrave:  “Work zone incursions pose one of the most significant risks to road workers, and this solution reduces this level of risk.”

Workers on the M62 smart motorway upgrade deployed a temporary overheight detection solution to protect personnel working on scaffolding suspended beneath a bridge above live traffic.

The system combines Safelane with a sentry beam set at the required height and positioned some distance from the bridge. An overheight vehicle heading towards the bridge will break the beam, automatically triggering flashing VMS signs and the Intellicone alarm which gives workers time to vacate the potential impact area before the vehicle arrives.   

Chris Hunter, stores manager for the BAM Morgan Sindall Joint Venture, said: “Within the first week there were three breaches, all of which were quickly remedied as the drivers were alerted and able to turn around and find an alternative route.”

For more information on companies in this article

Related Content

  • Truvelo TRIMMS night-time speeds on unlit roads
    June 5, 2014
    Truvelo UK’s new TRIMMS infrared illumination enables mobile speed enforcement in the dead of night. Lincolnshire is the UK’s fourth-largest county, has a population of over a million and is predominantly rural. Only 66km of its 8,893km road network is dual carriageway and 79% of the rest is ‘C’ class or unclassified roads. In terms of Killed and Seriously Injured (KSI) figures, there were 415 casualties in 2013 (down from 526 in 2002). Official figures show inappropriate speed accounts for 25% of the UK’s
  • The twisting path to enforcement’s future
    June 5, 2014
    Survey reveals some division of views about enforcement’s future as Colin Sowman discovers. Technological advances and legislative changes pose many questions for those involved in road enforcement, ranging from the changing demands of privacy and data protection legislation to the practicalities on multi-speed enforcement. So to get the industry’s views ITS International took soundings on some of these bigger questions. In a world where many vehicles are fitted with GPS linked ‘black box’ telematics system
  • Study shows curve warning systems ‘reduce crashes’
    February 24, 2016
    A study by the US Federal Highway Administration’s Highways for Life has found a small but consistent reductions in mean and 85 percentile speeds on dangerous bends through the use of Tapco’s BlinkerChevron dynamic curve warning and guidance system (DCWGS) instead of static warning signs. The system's detects oncoming vehicles up to 90m (300ft) from the curve and will trigger the flashing LEDs on the signs if the vehicle’s speed exceed a predetermined level to warn the driver of the dangerous curves with e
  • Reducing injuries and deaths in US workzones shouldn’t be this complicated
    April 17, 2023
    In National Work Zone Awareness Week, surely the least we can do is to help get road workers home safely at the end of the day, says One.network's boss