Skip to main content

Safelane automates work zone perimeter guarding

The safety of workers during road closures and working alongside, or above, live lanes is becoming an automated process. Ten workers suffered major injuries while working on or near motorways and major A roads in England in 2013, and between 2009 and 2013 eight had been killed. It was against that background that the first commercial application Safelane, the automated traffic management system designed to detect work zone incursions, was carried out during the temporary closure of a motorway.
June 12, 2015 Read time: 4 mins
Safelane’s combination of perimeter guarding and variable message signs proved its worth during a full motorway closure.

The safety of workers during road closures and working alongside, or above, live lanes is becoming an automated process.

Ten workers suffered major injuries while working on or near motorways and major A roads in England in 2013, and between 2009 and 2013 eight had been killed. It was against that background that the first commercial application 7363 Safelane, the automated traffic management system designed to detect work zone incursions, was carried out during the temporary closure of a motorway.

Developed by a partnership between 6918 Mobile Visual Information Systems and ITS technology firm Highways Resource Solutions, the system combines the Intellicone electronic perimeter monitoring and variable message signs (VMS) to boost work zone safety and reduce the number of workers in the danger zone guarding the perimeter.

7364 Intellicone sensors are placed on each of the cones used for temporary closures and if they are moved a signal is sent to an alarm to alert personnel in the work zone. In the Safelane application, a VMS message is wirelessly triggered to alert the errant driver before they reach the workers. 

Traffic management firm Chevron deployed Safelane to manage the full closure of the M56 between junctions 5 and 6 over a weekend, to allow a 1,500tonne bridge to be lifted into place to improve access to Manchester Airport. This required directing vehicles off the motorway and preventing other road users joining the motorway at four closure points using VMS with live streaming CCTV mounted on the same platforms.

The VMS were surrounded by HRS’ Intellicone intelligent cone barriers and contactless sensors to detect breaches and during the closure VMS messages warned around 170,000 motorists they were approaching the work zone, of the road closure ahead, and of the CCTV surveillance.

This solution meant that only two personnel per shift were deployed on perimeter guarding duties (compared with six for traditional methods), minimising the number of workers in high-risk locations. 

There was one work zone breach, lower than Chevron would normally expect, which occurred when a motorcycle passed between two cones at an unmanned location triggering the alarm. Simultaneously, the gatemen positioned at checkpoint locations received an automatic audible alarm alerting them to the incursion and enabling them to stop the vehicle. The CCTV camera recorded the incident which can be used in any follow-up action as required.

Each gatemen had a manual panic alarm if they needed to warn the workforce of an incursion. The inclusion of a human element in the fully automatic system was to ensure that the more than 100 workers were alerted only when necessary and so prevent unnecessary disruptions which can lead to workers ignoring the alarms.

8143 Chevron’s area manager, John Walls said: “While improving the safety of our workers, we saved four men and four vehicles per shift.  Previously we used six men and six vehicles per shift but, with the new kit in place, this was reduced to two of each per shift and we covered all closure points.

“The VMS element improved the information available to road users negotiating the roadworks.”

Added MVIS’ managing director, Pat Musgrave:  “Work zone incursions pose one of the most significant risks to road workers, and this solution reduces this level of risk.”

Workers on the M62 smart motorway upgrade deployed a temporary overheight detection solution to protect personnel working on scaffolding suspended beneath a bridge above live traffic.

The system combines Safelane with a sentry beam set at the required height and positioned some distance from the bridge. An overheight vehicle heading towards the bridge will break the beam, automatically triggering flashing VMS signs and the Intellicone alarm which gives workers time to vacate the potential impact area before the vehicle arrives.   

Chris Hunter, stores manager for the BAM Morgan Sindall Joint Venture, said: “Within the first week there were three breaches, all of which were quickly remedied as the drivers were alerted and able to turn around and find an alternative route.”

For more information on companies in this article

Related Content

  • Smart Spanish city trials cell-based traffic management
    November 7, 2013
    David Crawford reports on an urban electronic nervous system. The northern Spanish city of Santander – historically a port - is now an emerging technology showcase attracting global attention as a prototype for a medium-sized smart city of the future. In a move to determine the optimal use of available data, it is creating a de-facto experimental laboratory for sensor and mobile phone-based urban traffic management and environmental monitoring innovations.
  • Intertraffic Amsterdam 2016 Innovation Awards finalists
    February 1, 2016
    Smart and innovative thinking will again be awarded at the world’s largest, and best attended, trade fair for the infrastructure, traffic management, safety, parking, and smart mobility sectors, when the winners of the 2016 Intertraffic Innovation Awards are announced on 5 April during the opening ceremony.
  • Bartco UK and MVIS integrate ITS technology
    April 20, 2017
    VMS manufacturer Bartco UK used Traffex to showcase its integration of ITS products which aim to increase road safety. The company is working with SRL Traffic Systems on the integration of its HD Quattro portable variable message sign (VMS) with temporary traffic lights, designed to show basic safety information during temporary traffic light installation and road works. Measuring 650mm x 750mm, the sign is being integrated on the same boxes and posts SRL uses for its Radiolight temporary traffic li
  • From coast to coast: US states embrace automated enforcement for safer roads, says Verra Mobility
    September 12, 2023
    The concept of Vision Zero has hit a pothole in the US – but there is hope for a safer future, says Jon Baldwin, executive vice president, government solutions, at Verra Mobility