Skip to main content

Safelane automates work zone perimeter guarding

The safety of workers during road closures and working alongside, or above, live lanes is becoming an automated process. Ten workers suffered major injuries while working on or near motorways and major A roads in England in 2013, and between 2009 and 2013 eight had been killed. It was against that background that the first commercial application Safelane, the automated traffic management system designed to detect work zone incursions, was carried out during the temporary closure of a motorway.
June 12, 2015 Read time: 4 mins
Safelane’s combination of perimeter guarding and variable message signs proved its worth during a full motorway closure.

The safety of workers during road closures and working alongside, or above, live lanes is becoming an automated process.

Ten workers suffered major injuries while working on or near motorways and major A roads in England in 2013, and between 2009 and 2013 eight had been killed. It was against that background that the first commercial application 7363 Safelane, the automated traffic management system designed to detect work zone incursions, was carried out during the temporary closure of a motorway.

Developed by a partnership between 6918 Mobile Visual Information Systems and ITS technology firm Highways Resource Solutions, the system combines the Intellicone electronic perimeter monitoring and variable message signs (VMS) to boost work zone safety and reduce the number of workers in the danger zone guarding the perimeter.

7364 Intellicone sensors are placed on each of the cones used for temporary closures and if they are moved a signal is sent to an alarm to alert personnel in the work zone. In the Safelane application, a VMS message is wirelessly triggered to alert the errant driver before they reach the workers. 

Traffic management firm Chevron deployed Safelane to manage the full closure of the M56 between junctions 5 and 6 over a weekend, to allow a 1,500tonne bridge to be lifted into place to improve access to Manchester Airport. This required directing vehicles off the motorway and preventing other road users joining the motorway at four closure points using VMS with live streaming CCTV mounted on the same platforms.

The VMS were surrounded by HRS’ Intellicone intelligent cone barriers and contactless sensors to detect breaches and during the closure VMS messages warned around 170,000 motorists they were approaching the work zone, of the road closure ahead, and of the CCTV surveillance.

This solution meant that only two personnel per shift were deployed on perimeter guarding duties (compared with six for traditional methods), minimising the number of workers in high-risk locations. 

There was one work zone breach, lower than Chevron would normally expect, which occurred when a motorcycle passed between two cones at an unmanned location triggering the alarm. Simultaneously, the gatemen positioned at checkpoint locations received an automatic audible alarm alerting them to the incursion and enabling them to stop the vehicle. The CCTV camera recorded the incident which can be used in any follow-up action as required.

Each gatemen had a manual panic alarm if they needed to warn the workforce of an incursion. The inclusion of a human element in the fully automatic system was to ensure that the more than 100 workers were alerted only when necessary and so prevent unnecessary disruptions which can lead to workers ignoring the alarms.

8143 Chevron’s area manager, John Walls said: “While improving the safety of our workers, we saved four men and four vehicles per shift.  Previously we used six men and six vehicles per shift but, with the new kit in place, this was reduced to two of each per shift and we covered all closure points.

“The VMS element improved the information available to road users negotiating the roadworks.”

Added MVIS’ managing director, Pat Musgrave:  “Work zone incursions pose one of the most significant risks to road workers, and this solution reduces this level of risk.”

Workers on the M62 smart motorway upgrade deployed a temporary overheight detection solution to protect personnel working on scaffolding suspended beneath a bridge above live traffic.

The system combines Safelane with a sentry beam set at the required height and positioned some distance from the bridge. An overheight vehicle heading towards the bridge will break the beam, automatically triggering flashing VMS signs and the Intellicone alarm which gives workers time to vacate the potential impact area before the vehicle arrives.   

Chris Hunter, stores manager for the BAM Morgan Sindall Joint Venture, said: “Within the first week there were three breaches, all of which were quickly remedied as the drivers were alerted and able to turn around and find an alternative route.”

Related Content

  • April 9, 2014
    ITS homes in on cycling safety
    A new generation of ITS equipment is helping road authorities get to grips with cycle safety – and not a moment too soon as Colin Sowman discovers. Cyclists - remember them? Apparently not. At least not according to the OECD 2013 report Cycling, Health and Safety which contains the statement: ‘Cyclists are often forgotten in the design of the road traffic system’. Looking through the statistics that exist (each country appears to compile them differently) it is not difficult to see how such a conclusion cou
  • January 30, 2012
    Managed motorways, hard shoulder running aids safety, saves time
    The announcement that, in 2012/13, work to extend Managed Motorways to Junctions 5-8 of the M6 near Birmingham in the West Midlands is scheduled to start marks the next step for the UK's hard shoulder running concept, first introduced on the M42 in 2006. The M6 scheme is in fact one of several announced; over the next few years work will start on applying Managed Motorways to various sections of the M1, M25 London Orbital, M60 and M62. According to Paul Unwin, senior project manager with the Highways Agency
  • January 31, 2012
    Wrong Way Detection System prevents accidents, improves safety
    In 2006, within a span of four months, two incidents of drivers entering the 16km-long Westpark Tollway in Houston, Texas resulted in horrific accidents that caused a number of fatalities. As a result, Harris County Toll Road Authority (HCTRA) began investigating technologies that could help detect vehicles entering the tollway in the wrong direction.
  • June 21, 2016
    Keeping a close watch on ‘too-dangerous-to-drive’ highway
    Like many others, the authorities in Argentina implemented ITS to improve road safety – but this case was a little different to most as Mauro Nogarin explains. The 70km of highway that separate Argentina’s capital Buenos Aires from the city of La Plata had long been considered too dangerous for anyone to make the trip with a private car. Figures on criminal attacks and vandalism with stones, nails, logs, spark plugs or any other element that can damage a car’s tyres and cause them to stop in order rob th