Skip to main content

Safelane automates work zone perimeter guarding

The safety of workers during road closures and working alongside, or above, live lanes is becoming an automated process. Ten workers suffered major injuries while working on or near motorways and major A roads in England in 2013, and between 2009 and 2013 eight had been killed. It was against that background that the first commercial application Safelane, the automated traffic management system designed to detect work zone incursions, was carried out during the temporary closure of a motorway.
June 12, 2015 Read time: 4 mins
Safelane’s combination of perimeter guarding and variable message signs proved its worth during a full motorway closure.

The safety of workers during road closures and working alongside, or above, live lanes is becoming an automated process.

Ten workers suffered major injuries while working on or near motorways and major A roads in England in 2013, and between 2009 and 2013 eight had been killed. It was against that background that the first commercial application 7363 Safelane, the automated traffic management system designed to detect work zone incursions, was carried out during the temporary closure of a motorway.

Developed by a partnership between 6918 Mobile Visual Information Systems and ITS technology firm Highways Resource Solutions, the system combines the Intellicone electronic perimeter monitoring and variable message signs (VMS) to boost work zone safety and reduce the number of workers in the danger zone guarding the perimeter.

7364 Intellicone sensors are placed on each of the cones used for temporary closures and if they are moved a signal is sent to an alarm to alert personnel in the work zone. In the Safelane application, a VMS message is wirelessly triggered to alert the errant driver before they reach the workers. 

Traffic management firm Chevron deployed Safelane to manage the full closure of the M56 between junctions 5 and 6 over a weekend, to allow a 1,500tonne bridge to be lifted into place to improve access to Manchester Airport. This required directing vehicles off the motorway and preventing other road users joining the motorway at four closure points using VMS with live streaming CCTV mounted on the same platforms.

The VMS were surrounded by HRS’ Intellicone intelligent cone barriers and contactless sensors to detect breaches and during the closure VMS messages warned around 170,000 motorists they were approaching the work zone, of the road closure ahead, and of the CCTV surveillance.

This solution meant that only two personnel per shift were deployed on perimeter guarding duties (compared with six for traditional methods), minimising the number of workers in high-risk locations. 

There was one work zone breach, lower than Chevron would normally expect, which occurred when a motorcycle passed between two cones at an unmanned location triggering the alarm. Simultaneously, the gatemen positioned at checkpoint locations received an automatic audible alarm alerting them to the incursion and enabling them to stop the vehicle. The CCTV camera recorded the incident which can be used in any follow-up action as required.

Each gatemen had a manual panic alarm if they needed to warn the workforce of an incursion. The inclusion of a human element in the fully automatic system was to ensure that the more than 100 workers were alerted only when necessary and so prevent unnecessary disruptions which can lead to workers ignoring the alarms.

8143 Chevron’s area manager, John Walls said: “While improving the safety of our workers, we saved four men and four vehicles per shift.  Previously we used six men and six vehicles per shift but, with the new kit in place, this was reduced to two of each per shift and we covered all closure points.

“The VMS element improved the information available to road users negotiating the roadworks.”

Added MVIS’ managing director, Pat Musgrave:  “Work zone incursions pose one of the most significant risks to road workers, and this solution reduces this level of risk.”

Workers on the M62 smart motorway upgrade deployed a temporary overheight detection solution to protect personnel working on scaffolding suspended beneath a bridge above live traffic.

The system combines Safelane with a sentry beam set at the required height and positioned some distance from the bridge. An overheight vehicle heading towards the bridge will break the beam, automatically triggering flashing VMS signs and the Intellicone alarm which gives workers time to vacate the potential impact area before the vehicle arrives.   

Chris Hunter, stores manager for the BAM Morgan Sindall Joint Venture, said: “Within the first week there were three breaches, all of which were quickly remedied as the drivers were alerted and able to turn around and find an alternative route.”

For more information on companies in this article

Related Content

  • Knowing when to slow down
    August 8, 2018
    Level 2 driver assistance vehicles have little problem reading fixed metal signs at the roadside - but it’s a different story with VMS in tunnels, finds Alan Dron. Following a series of hands-free driving tests in tunnels, an Australian road authority believes that car manufacturers have to up their game before vehicles have the required levels of competence to consistently perform ‘assisted driving’ tasks. The trials, in the state of Victoria late last year, tested the ability of several vehicles to stay
  • Driven to distraction? Call Acusensus
    November 3, 2022
    Trial to detect mobile phone and seatbelt offences results in 216 prosecution notices
  • South Africa's traffic management and enforcement gears up
    February 1, 2012
    Paul Vorster, CEO of ITS South Africa, takes a look at the national enforcement situation in the year when the country gears up to host the FIFA Soccer World Cup. There are four main drivers pushing the growth of ITS-related law enforcement within South Africa. These are: transport operations associated with hosting the FIFA Soccer World Cup 2010; traffic management linked to increasing congestion; the development of new public transport systems such as BRT; and vehicle and driver-related crime.
  • US to test connected vehicle technologies in six cities
    April 25, 2012
    The US Department of Transportation has announced the six cities where it will hold Driver Acceptance Clinics for the connected vehicle programme. The first clinic will be held in Brooklyn, MI, near Detroit, in August, while the remaining clinics will be held in Minneapolis, Orlando, FL, Blacksburg, VA, Dallas and San Francisco.