Skip to main content

Knowing when to slow down

Level 2 driver assistance vehicles have little problem reading fixed metal signs at the roadside - but it’s a different story with VMS in tunnels, finds Alan Dron. Following a series of hands-free driving tests in tunnels, an Australian road authority believes that car manufacturers have to up their game before vehicles have the required levels of competence to consistently perform ‘assisted driving’ tasks. The trials, in the state of Victoria late last year, tested the ability of several vehicles to stay
August 8, 2018 Read time: 6 mins
There was no problem with the VMS refresh rate, ConnectEast found

Level 2 driver assistance vehicles have little problem reading fixed metal signs at the roadside - but it’s a different story with VMS in tunnels, finds Alan Dron

Following a series of hands-free driving tests in tunnels, an Australian road authority believes that car manufacturers have to up their game before vehicles have the required levels of competence to consistently perform ‘assisted driving’ tasks.

The trials, in the state of Victoria late last year, tested the ability of several vehicles to stay within lanes and to read speed signs on 8735 EastLink, the main north-south artery on the eastern side of Melbourne. EastLink has two 1.6km tunnels with three lanes each.


The ‘level 2 driver assistance’ vehicles – which incorporate capabilities such as lane-keeping and observance of speed limits – displayed varying levels of proficiency, said Douglas Spencer-Roy, corporate affairs and marketing manager of road operator ConnectEast.

Lane markings

As a result of the trials, ConnectEast is repainting all its lane markings to ensure they are more easily followed by assisted-driving vehicles. This involves using a more reflective paint and identifying areas where lane markings are not contiguous, which

can cause problems for the vehicles’ systems. Currently, assisted vehicles’ speed adherence capabilities are limited to warning a driver if he is exceeding a speed limit. However, the next stage will be for vehicles to automatically adjust their speed as they read speed signs by the roadside.

The abilities of vehicles to read speed signs “varied quite a bit from manufacturer to manufacturer”, said Spencer-Roy. “They generally read fixed metal signs at the roadside very well, but have quite patchy performance with variable message signs [537 VMS], which are particularly used in tunnels.”

ConnectEast initially wondered if this varying performance was caused by a problem with the VMS, such as its refresh rate. Research found, however, that the problem lay with some vehicles’ sensing software, which required modification. Feedback has been provided to several manufacturers to allow them to improve their vehicles for use on Victoria’s roads.

Low light

“However, with the new 5.9GHz system, that’s almost like having a VMS in the car,” said Spencer-Roy. “With that infrastructure we‘ll be able to send  a message out to a vehicle on a stretch of road and it will display it to the driver. As that becomes more common, VMS signs will become less relevant.”

Relatively low light levels within tunnels did not affect the cars’ capabilities, he added – except at the entrance and exit portals, where the lane-keeping function sometimes dropped out because of the sudden change in light levels.

Generally, however, the systems performed well in tunnels, as conditions there are relatively ‘calm’ environmentally, with consistent light levels and little visual clutter to distract the vehicles’ image recognition systems.

Ventilation on demand

Meanwhile, ConnectEast believes it has achieved a world first with the installation and licensing of a tunnel ‘ventilation on demand’ project (pictured below).

The original ventilation system, operational since the 8735 EastLink tunnels opened in 2008, consisted of 34 fans, which extracted air from the tunnels and dispersed it away from local properties. The speed of the fans, and thus the volume of air extracted, was determined by a simple pre-set time mechanism, which catered for rush hours and increased volume of traffic.

However, the fans could only be set at ‘off’ or ‘fully on’. These sudden changes in speed caused wear and tear on their components.

A new, self-regulating, ‘closed loop’ system has now been installed, with variable-speed drives and new impellers in the 10 ventilation fan housings. The fully-automatic system constantly monitors both the output and air quality of the extracted air and adjusts the speed of each fan accordingly.

Emissions levels

It will, for example, detect the presence of higher levels of emissions from heavy, diesel-powered vehicles and increase the airflow through the fans.The new system has led to reductions in greenhouse gas emissions (some 6,400 tonnes per year) and noise annoyance for local communities, as well as a reduction in the electricity usage - and thus cost - of operating the fans.

“The results of our innovative tunnel ventilation on demand system have exceeded expectations,” added Spencer-Roy. “Power used by the system has reduced by a massive 68%, and the audible noise from the ventilation stacks has halved.”

As a result, the system has been licensed by Environment Protection Authority Victoria.

New installation

Spanish company 6770 SICE has marked the first year’s successful operation of its SIDERA tunnel management software at New Zealand’s Waterview Connection Tunnel with the announcement of a new tunnel in which its equipment is installed.

The 3.3km SR99 Alaskan Way Viaduct Bored Tunnel in Seattle is expected to open by the end of this year and SICE is providing a package of management software covering such areas as incident detection, air quality monitoring and communications, as well as security and access control.

Meanwhile, SIDERA handles a throughput of 63,000 vehicles a day at Waterview, whose twin bores constitute the longest and most complex tunnel in the country. As well as handling surveillance and incident management, it reports on the performance of the roadways and can disseminate traveller information to the motoring public and exchange critical information among agencies.

The tunnel authorities have identified and planned for 128 different scenarios per tunnel, including 86 places in the tunnel where fire could occur. During pre-opening testing, the system ran through around 200 fire scenarios to ensure all eventualities could be handled.

Safety priority

Tunnel and roads authorities’ first priority is, of course, safety. Some devastating tunnel fires over the past two decades – the 1999 Mont Blanc tunnel inferno and the 2001 Gotthard tunnel blaze, for example – have underlined the unrelenting need for it, but they are also naturally keen to implement safety measures as economically as possible. It is the combination of those two factors, says 819 Navtech Radar, which is helping drive sales of its CTS175 tunnel radar, introduced earlier this year. The 175 is the smaller version of the company’s CTS350. The difference is in the range covered by the sensor, which gives radar coverage in both directions in a tunnel.

While the 350 can ‘look’ 350m in either direction and is ideal for straight stretches of tunnel, the 175 is particularly suitable for entrance and exit areas and for areas where there are sharp inclines or bends, which limit the 350’s effective range. In the CTS175, Navtech produced a radar with the same capabilities as the 350, but with scaled-down range and a lower price point.

Navtech’s products are frequently pitched against visual and acoustic sensors. Each have their own selling points, the company accepts, but it believes that radar tends to win out not only because its performance is unhindered if fire does break out and the resulting smoke obscures visibility for cameras, but because of the lower cost of ownership. Tunnel authorities do not have to clean the sensors of tyre and road dust and accumulated exhaust particles every few months.

For more information on companies in this article

Related Content

  • Selecting the right camera for safety or security
    January 30, 2012
    Machine vision systems offer great variety of function and performance. Teledyne DALSA product manager Manuel Romero describes 10 key criteria to aid selection of advanced camera technology for safety or security applications. There are many ways in which machine vision systems can enhance safety and security in transportation, but the ultimate results will only be as good as the image produced. Success relies on correct selection of the camera of such systems, as the features and performance required vary
  • Nairobi looks to ITS to ease travel problems
    December 21, 2017
    Shem Oirere looks at plans to tackle chronic congestion in the Kenyan capital. Traffic jams in the Kenyan capital, Nairobi, are estimated to cost the country $360 million a year in terms of lost man-hours, fuel and pollution. According to Wilfred Oginga, an engineer with the Kenya Urban Roads Authority (KURA), the congestion has been exacerbated by poor regulation and enforcement of traffic rules, absence of adequate traffic management systems and poor utilisation of existing road facilities.
  • Intertraffic Awards 2022: shortlist announced!
    February 4, 2022
    Winners will be revealed at the opening ceremony of Intertraffic Amsterdam in March
  • LVCVA approves Elon Musk's underground people mover
    June 3, 2019
    The Las Vegas Convention and Visitors Authority (LVCVA) has approved a contract with Elon Musk’s The Boring Company (TBC) to construct an underground people mover. LVCVA says the $48.675,000 contract will allow TBC to build a people mover that could safely carry passengers in autonomous electric vehicles via a loop of underground express-route tunnels. The underground loop system is expected to offer reduced total costs and less disruption to pedestrian and vehicle traffic. Once complete, the loop is