Skip to main content

Knowing when to slow down

Level 2 driver assistance vehicles have little problem reading fixed metal signs at the roadside - but it’s a different story with VMS in tunnels, finds Alan Dron. Following a series of hands-free driving tests in tunnels, an Australian road authority believes that car manufacturers have to up their game before vehicles have the required levels of competence to consistently perform ‘assisted driving’ tasks. The trials, in the state of Victoria late last year, tested the ability of several vehicles to stay
August 8, 2018 Read time: 6 mins
There was no problem with the VMS refresh rate, ConnectEast found

Level 2 driver assistance vehicles have little problem reading fixed metal signs at the roadside - but it’s a different story with VMS in tunnels, finds Alan Dron

Following a series of hands-free driving tests in tunnels, an Australian road authority believes that car manufacturers have to up their game before vehicles have the required levels of competence to consistently perform ‘assisted driving’ tasks.

The trials, in the state of Victoria late last year, tested the ability of several vehicles to stay within lanes and to read speed signs on 8735 EastLink, the main north-south artery on the eastern side of Melbourne. EastLink has two 1.6km tunnels with three lanes each.


The ‘level 2 driver assistance’ vehicles – which incorporate capabilities such as lane-keeping and observance of speed limits – displayed varying levels of proficiency, said Douglas Spencer-Roy, corporate affairs and marketing manager of road operator ConnectEast.

Lane markings

As a result of the trials, ConnectEast is repainting all its lane markings to ensure they are more easily followed by assisted-driving vehicles. This involves using a more reflective paint and identifying areas where lane markings are not contiguous, which

can cause problems for the vehicles’ systems. Currently, assisted vehicles’ speed adherence capabilities are limited to warning a driver if he is exceeding a speed limit. However, the next stage will be for vehicles to automatically adjust their speed as they read speed signs by the roadside.

The abilities of vehicles to read speed signs “varied quite a bit from manufacturer to manufacturer”, said Spencer-Roy. “They generally read fixed metal signs at the roadside very well, but have quite patchy performance with variable message signs [537 VMS], which are particularly used in tunnels.”

ConnectEast initially wondered if this varying performance was caused by a problem with the VMS, such as its refresh rate. Research found, however, that the problem lay with some vehicles’ sensing software, which required modification. Feedback has been provided to several manufacturers to allow them to improve their vehicles for use on Victoria’s roads.

Low light

“However, with the new 5.9GHz system, that’s almost like having a VMS in the car,” said Spencer-Roy. “With that infrastructure we‘ll be able to send  a message out to a vehicle on a stretch of road and it will display it to the driver. As that becomes more common, VMS signs will become less relevant.”

Relatively low light levels within tunnels did not affect the cars’ capabilities, he added – except at the entrance and exit portals, where the lane-keeping function sometimes dropped out because of the sudden change in light levels.

Generally, however, the systems performed well in tunnels, as conditions there are relatively ‘calm’ environmentally, with consistent light levels and little visual clutter to distract the vehicles’ image recognition systems.

Ventilation on demand

Meanwhile, ConnectEast believes it has achieved a world first with the installation and licensing of a tunnel ‘ventilation on demand’ project (pictured below).

The original ventilation system, operational since the 8735 EastLink tunnels opened in 2008, consisted of 34 fans, which extracted air from the tunnels and dispersed it away from local properties. The speed of the fans, and thus the volume of air extracted, was determined by a simple pre-set time mechanism, which catered for rush hours and increased volume of traffic.

However, the fans could only be set at ‘off’ or ‘fully on’. These sudden changes in speed caused wear and tear on their components.

A new, self-regulating, ‘closed loop’ system has now been installed, with variable-speed drives and new impellers in the 10 ventilation fan housings. The fully-automatic system constantly monitors both the output and air quality of the extracted air and adjusts the speed of each fan accordingly.

Emissions levels

It will, for example, detect the presence of higher levels of emissions from heavy, diesel-powered vehicles and increase the airflow through the fans.The new system has led to reductions in greenhouse gas emissions (some 6,400 tonnes per year) and noise annoyance for local communities, as well as a reduction in the electricity usage - and thus cost - of operating the fans.

“The results of our innovative tunnel ventilation on demand system have exceeded expectations,” added Spencer-Roy. “Power used by the system has reduced by a massive 68%, and the audible noise from the ventilation stacks has halved.”

As a result, the system has been licensed by Environment Protection Authority Victoria.

New installation

Spanish company 6770 SICE has marked the first year’s successful operation of its SIDERA tunnel management software at New Zealand’s Waterview Connection Tunnel with the announcement of a new tunnel in which its equipment is installed.

The 3.3km SR99 Alaskan Way Viaduct Bored Tunnel in Seattle is expected to open by the end of this year and SICE is providing a package of management software covering such areas as incident detection, air quality monitoring and communications, as well as security and access control.

Meanwhile, SIDERA handles a throughput of 63,000 vehicles a day at Waterview, whose twin bores constitute the longest and most complex tunnel in the country. As well as handling surveillance and incident management, it reports on the performance of the roadways and can disseminate traveller information to the motoring public and exchange critical information among agencies.

The tunnel authorities have identified and planned for 128 different scenarios per tunnel, including 86 places in the tunnel where fire could occur. During pre-opening testing, the system ran through around 200 fire scenarios to ensure all eventualities could be handled.

Safety priority

Tunnel and roads authorities’ first priority is, of course, safety. Some devastating tunnel fires over the past two decades – the 1999 Mont Blanc tunnel inferno and the 2001 Gotthard tunnel blaze, for example – have underlined the unrelenting need for it, but they are also naturally keen to implement safety measures as economically as possible. It is the combination of those two factors, says 819 Navtech Radar, which is helping drive sales of its CTS175 tunnel radar, introduced earlier this year. The 175 is the smaller version of the company’s CTS350. The difference is in the range covered by the sensor, which gives radar coverage in both directions in a tunnel.

While the 350 can ‘look’ 350m in either direction and is ideal for straight stretches of tunnel, the 175 is particularly suitable for entrance and exit areas and for areas where there are sharp inclines or bends, which limit the 350’s effective range. In the CTS175, Navtech produced a radar with the same capabilities as the 350, but with scaled-down range and a lower price point.

Navtech’s products are frequently pitched against visual and acoustic sensors. Each have their own selling points, the company accepts, but it believes that radar tends to win out not only because its performance is unhindered if fire does break out and the resulting smoke obscures visibility for cameras, but because of the lower cost of ownership. Tunnel authorities do not have to clean the sensors of tyre and road dust and accumulated exhaust particles every few months.

For more information on companies in this article

Related Content

  • The Asia-Pacific poses a multitude of ITS challenges
    May 30, 2014
    The Asia-Pacific ITS Forum and Exhibition in Auckland, New Zealand, provided a focus for the region’s ITS Associations. Mary Bell reports. In late April, ITS New Zealand hosted the 13th Asia-Pacific ITS Forum and Exhibition in Auckland. Around 350 delegates from 24 nations gathered to share and advance ITS applications on both strategic and technical levels and to discuss the differing and various challenges faced in the region.
  • Cost benefit: just $25 boosts pedestrian safety in Florida
    April 29, 2019
    A relatively straightforward change to the way that pedestrians cross the street in a Florida city has made a significant safety improvement. And what’s more, it was cheap, finds David Crawford Installing a lead pedestrian interval (LPI) system at 25 central business district signalised intersections in the Florida city of Lakeland has cut numbers of incidents involving pedestrians by some 60% - at a cost of US$25 for 30 minutes' work, according to traffic operations manager Angelo Rao.
  • Cooperative systems - traffic management centres of the future?
    February 1, 2012
    What will the traffic management centre of the future see and do? TNO's Frans op de Beek, who was responsible for putting together the Cooperative Mobility Demonstrations which included the Traffic Management Centre at this year's Intertraffic exhibition in Amsterdam, offers some insights. The road tours and demonstrations which took place at this year's Intertraffic to mark the conclusion of COOPERS, CVIS and SAFESPOT, the European Commission's (EC's) three major cooperative mobility projects, gave visitor
  • Righter shade of pale
    July 24, 2012
    Jon Tarleton, Quixote Transportation Technologies, Inc., talks about developments in mobile weather information gathering Quixote Transportation Technologies, Inc. (QTT) is promoting the greater use of mobile technologies to provide infill between fixed Road Weather Information System (RWIS) infrastructure. It is, the company says, a means of reducing the expense of providing comprehensive, network-wide coverage, particularly in geographic locations where the sheer number of centreline miles causes cost to