Nottingham’s SPECS average speed camera scheme ‘delivering real benefits’

Data from Nottinghamshire County Council, which installed a Vysionics SPECS3 average speed enforcement solution on the A614 in 2012, indicates that the cameras delivering real benefits on casualties and collisions, with early indications suggesting a significant reduction in the KSI rate and no fatalities since the cameras were first installed.
May 9, 2014 Read time: 2 mins
Data from Nottinghamshire County Council, which installed a 604 Vysionics SPECS3 average speed enforcement solution on the A614 in 2012, indicates that the cameras are delivering real benefits on casualties and collisions, with early indications suggesting a significant reduction in the KSI rate and no fatalities since the cameras were first installed.

The cameras were installed to address the serious collision and casualty history seen along a 21km section of the A614, a former trunk road linking Nottingham with the A1.  It is maintained to a high standard and features a wide, single carriageway with several central right turn features into local side roads.  The route has many bends and hills with no footway for most of its length and is one of the busiest non-trunk roads in Nottinghamshire.  Before the SPECS cameras were installed, the A614 had a significant casualty history with 289 people killed or injured in a five year period.

Sonya Hurt, Casualty Reduction manager for Nottinghamshire County Council, says: “Our average speed installations are proving year on year to be a known and effective method of reducing casualties around the county.  Where these cameras have been used elsewhere in Nottinghamshire, there has been an 80 per cent reduction in the number of people killed or seriously injured”.
Enforcement

For more information on companies in this article

Related Content

  • High-speed WIM moves onto the main highway
    May 24, 2016
    High-speed weigh-in-motion is starting to make its mark on both sides of the Atlantic. As a transit country the Czech Republic experiences a large number of overloaded vehicles, which greatly increase highway maintenance costs. This prompted its Transport Ministry to trial an extension of the capabilities of the existing truck tolling system to allow the dynamic high-speed weighing of cargo vehicles. In effect the tolling enforcement gantries become weigh-in-motion (WIM) locations.
    Read More
  • Jenoptik Traffic Solutions to supply speed enforcement systems to Hong Kong
    June 26, 2012
    The Traffic Solutions division of Jenoptik has announced it will be supplying over 30 installations, consisting of a mix of fixed, tunnel and mobile speed enforcement applications in the Tsing Ma and Tsing Sha Control Areas. Recently, the approval authority delegation from Hong Kong visited Jenoptik Robot in Germany to successfully perform a factory acceptance test. Close to 70 tests were performed over a period of five days to ensure the systems fully comply with the specifications in the tender. First del
    Read More
  • ATS study finds school bus stop arm cameras effective in reducing violations
    July 4, 2014
    Analysis carried out by American Traffic Systems (ATS) on routes where its CrossingGuard school bus stop arm cameras are installed found that, while the number of violations on those routes fell by more than 15 per cent during the school year, customers have reported stop arm running violation decreases fleet wide, on all buses. The analysis also finds that less than one per cent of drivers who receive one ticket get a second citation. Both results indicate the camera safety programs are off to a quick
    Read More
  • From coast to coast: US states embrace automated enforcement for safer roads, says Verra Mobility
    September 12, 2023
    The concept of Vision Zero has hit a pothole in the US – but there is hope for a safer future, says Jon Baldwin, executive vice president, government solutions, at Verra Mobility
    Read More

Highlighted Content