Skip to main content

Jenoptik technology for average speed enforcement pilot project

Jenoptik’s Traffic Solutions division is to participate in an 18-month Germany-wide section speed control (or average speed enforcement) pilot project. Jenoptik technology will initially be tested in Lower Saxony. Jenoptik will supply its laser scanner-based TraffiSection technology for the project in order to monitor the speed limit on a section of highway just under three kilometres in length on Federal Highway 6 south of Hanover. The system uses measuring systems and cameras installed at the entry an
February 3, 2015 Read time: 2 mins
79 Jenoptik’s Traffic Solutions division is to participate in an 18-month Germany-wide section speed control (or average speed enforcement) pilot project. Jenoptik technology will initially be tested in Lower Saxony.

Jenoptik will supply its laser scanner-based TraffiSection technology for the project in order to monitor the speed limit on a section of highway just under three kilometres in length on Federal Highway 6 south of Hanover.  The system uses measuring systems and cameras installed at the entry and exit points of an extended stretch highway to record vehicle licence plate data and measure average speed between the two points.

If a vehicle’s average speed over the section of highway exceeds the maximum permitted, a conventional high-resolution frontal photograph is taken with driver recognition when the vehicle exits the section of the highway. The system automatically records data such as the licence plate and a photograph of the driver for use in a later prosecution.

All data are encrypted and details of vehicles that have not exceeded the speed limit are stored only temporarily.

The system will be installed by the end of March 2015 and the test phase will start in April. Approval for Germany is to be obtained from the Germany’s national metrology institute Physikalisch-Technische Bundesanstalt (PTB) in the course of this year which will allow the system to go into full operation, probably in autumn of 2015.

Jenoptik president and CEO Michael Mertin commented: “We are pleased that we can support such a trend-setting project in Germany with our experience. Our modern technology for section speed control has already contributed to increase traffic safety in other countries. It has been used successfully for several years in the United Kingdom, in Austria and Switzerland as well as in Kuwait.”

For more information on companies in this article

Related Content

  • Cape Town’s new cameras will keep speeding drivers in check
    October 6, 2014
    The City of Cape Town has installed an average speed over distance, or average speed enforcement, system on Nelson Mandela Boulevard in its latest attempt to address speeding and promote road safety. The system, supplied by local company Syntell, consists of three sets of cameras that will cover all incoming and outgoing lanes and will become operational later this month, measuring the speed of all vehicles travelling in both directions between the bottom of Nelson Mandela Boulevard and the N2 and M3.
  • APA supports automated work zone speed enforcement
    July 17, 2015
    A trade association representing the highway construction industry strongly supports automated enforcement of speed limits in work zones and Maryland's experience with a similarly designed program has had very good results, the association head has told a joint Pennsylvania House and Senate committee. According to PennDOT, 24 people were killed in work-zone crashes in 2014, eight more than in 2013. Additionally, there were 1,841 crashes in work zones last year, a slight decrease from the 1,851 crashes
  • Tampa CV pilot ‘underestimated’ challenges
    October 20, 2020
    Connected vehicle applications may be falsely marketed as 'deployment-ready', review warns
  • WDM exhibits RAV road assessment vehicle
    April 4, 2016
    WDM, the UK’s leading manufacturer and provider of highway survey and monitoring equipment, will be exhibiting its RAV (road assessment vehicle) for the first time at Intertraffic Amsterdam. The RAV carries out high-speed data acquisition and recording of surface conditions, including measurement of radius of curvature, gradient and crossfall; the automatic recognition of surface cracking; plus geometric longitudinal profile, accurate at speeds down to 0kph.