Skip to main content

Jenoptik technology for average speed enforcement pilot project

Jenoptik’s Traffic Solutions division is to participate in an 18-month Germany-wide section speed control (or average speed enforcement) pilot project. Jenoptik technology will initially be tested in Lower Saxony. Jenoptik will supply its laser scanner-based TraffiSection technology for the project in order to monitor the speed limit on a section of highway just under three kilometres in length on Federal Highway 6 south of Hanover. The system uses measuring systems and cameras installed at the entry an
February 3, 2015 Read time: 2 mins
79 Jenoptik’s Traffic Solutions division is to participate in an 18-month Germany-wide section speed control (or average speed enforcement) pilot project. Jenoptik technology will initially be tested in Lower Saxony.

Jenoptik will supply its laser scanner-based TraffiSection technology for the project in order to monitor the speed limit on a section of highway just under three kilometres in length on Federal Highway 6 south of Hanover.  The system uses measuring systems and cameras installed at the entry and exit points of an extended stretch highway to record vehicle licence plate data and measure average speed between the two points.

If a vehicle’s average speed over the section of highway exceeds the maximum permitted, a conventional high-resolution frontal photograph is taken with driver recognition when the vehicle exits the section of the highway. The system automatically records data such as the licence plate and a photograph of the driver for use in a later prosecution.

All data are encrypted and details of vehicles that have not exceeded the speed limit are stored only temporarily.

The system will be installed by the end of March 2015 and the test phase will start in April. Approval for Germany is to be obtained from the Germany’s national metrology institute Physikalisch-Technische Bundesanstalt (PTB) in the course of this year which will allow the system to go into full operation, probably in autumn of 2015.

Jenoptik president and CEO Michael Mertin commented: “We are pleased that we can support such a trend-setting project in Germany with our experience. Our modern technology for section speed control has already contributed to increase traffic safety in other countries. It has been used successfully for several years in the United Kingdom, in Austria and Switzerland as well as in Kuwait.”

For more information on companies in this article

Related Content

  • Computer technology increasingly aids traffic management
    February 3, 2012
    Alan Perrott, Tyco Fire & Integrated Solutions (UK) Ltd, looks at trends in CCTV technology for traffic surveillance applications
  • Building the case for photo enforcement
    October 26, 2016
    As red light enforcement is returning to some intersections and being shut down at others, new evidence has been released backing the safety campaigners, reports Jon Masters. In 2014, 709 Americans were killed in red-light-running crashes and an estimated 126,000 were injured according to the Insurance Institute for Highway Safety (IIHS).
  • Kapsch wins in Australia
    December 20, 2013
    Kapsch TrafficCom has been appointed to deliver two high profile electronic tolling projects in Australia. The contracts will see Kapsch TrafficCom deliver multi-lane free-flow (MLFF) tolling solutions on the Eastern Distributor toll road in Sydney and the Legacy Way toll road in Brisbane using Kapsch multi-lane free-flow single gantry technology. Kapsch TrafficCom’s single gantry solution will be deployed in both projects and to provide stereoscopic vehicle detection and classification, front and rear l
  • Hayden AI deploys bus enforcement cameras in Sacramento
    January 2, 2025
    California city's authorities will start issuing fines from February