Skip to main content

Jenoptik technology for average speed enforcement pilot project

Jenoptik’s Traffic Solutions division is to participate in an 18-month Germany-wide section speed control (or average speed enforcement) pilot project. Jenoptik technology will initially be tested in Lower Saxony. Jenoptik will supply its laser scanner-based TraffiSection technology for the project in order to monitor the speed limit on a section of highway just under three kilometres in length on Federal Highway 6 south of Hanover. The system uses measuring systems and cameras installed at the entry an
February 3, 2015 Read time: 2 mins
79 Jenoptik’s Traffic Solutions division is to participate in an 18-month Germany-wide section speed control (or average speed enforcement) pilot project. Jenoptik technology will initially be tested in Lower Saxony.

Jenoptik will supply its laser scanner-based TraffiSection technology for the project in order to monitor the speed limit on a section of highway just under three kilometres in length on Federal Highway 6 south of Hanover.  The system uses measuring systems and cameras installed at the entry and exit points of an extended stretch highway to record vehicle licence plate data and measure average speed between the two points.

If a vehicle’s average speed over the section of highway exceeds the maximum permitted, a conventional high-resolution frontal photograph is taken with driver recognition when the vehicle exits the section of the highway. The system automatically records data such as the licence plate and a photograph of the driver for use in a later prosecution.

All data are encrypted and details of vehicles that have not exceeded the speed limit are stored only temporarily.

The system will be installed by the end of March 2015 and the test phase will start in April. Approval for Germany is to be obtained from the Germany’s national metrology institute Physikalisch-Technische Bundesanstalt (PTB) in the course of this year which will allow the system to go into full operation, probably in autumn of 2015.

Jenoptik president and CEO Michael Mertin commented: “We are pleased that we can support such a trend-setting project in Germany with our experience. Our modern technology for section speed control has already contributed to increase traffic safety in other countries. It has been used successfully for several years in the United Kingdom, in Austria and Switzerland as well as in Kuwait.”

For more information on companies in this article

Related Content

  • Kapsch outlines tolling options to combat traffic congestion
    January 11, 2017
    Michael Maitland from Kapsch TrafficCom looks at how the various forms of tolling can help authorities combat traffic congestion and air quality problems while simultaneously raising revenue.
  • Slower Swansea speed limits need Swarco signs
    July 4, 2023
    Firm will design and install signage for Welsh city's new 32km/h (20mph) urban speed limit
  • US DOTs introduce measures to stop wrong-way driving
    March 28, 2018
    Wrong-way driving (WWD) is a remarkably innocuous term for incidents that all too often cause some of the worst accidents that emergency services have to deal with. Several US states are now taking steps to minimise the problem, as Alan Dron finds out. You’re driving down a highway at night when you see approaching headlights. You initially assume they are merely those of an oncoming car on the opposite carriageway. It’s only when they are within 200 yards or so that you realise that the other driver is in
  • Agencies in pursuit of high-speed WIM accuracy
    April 20, 2017
    Alan Dron looks at where WIM is heading in the near future. As Weigh-In-Motion (WIM) systems grow in sophistication and accuracy, they are increasingly being used in more active roles to help ensure road safety through enforcement action against overweight vehicles.