Skip to main content

Jenoptik technology for average speed enforcement pilot project

Jenoptik’s Traffic Solutions division is to participate in an 18-month Germany-wide section speed control (or average speed enforcement) pilot project. Jenoptik technology will initially be tested in Lower Saxony. Jenoptik will supply its laser scanner-based TraffiSection technology for the project in order to monitor the speed limit on a section of highway just under three kilometres in length on Federal Highway 6 south of Hanover. The system uses measuring systems and cameras installed at the entry an
February 3, 2015 Read time: 2 mins
79 Jenoptik’s Traffic Solutions division is to participate in an 18-month Germany-wide section speed control (or average speed enforcement) pilot project. Jenoptik technology will initially be tested in Lower Saxony.

Jenoptik will supply its laser scanner-based TraffiSection technology for the project in order to monitor the speed limit on a section of highway just under three kilometres in length on Federal Highway 6 south of Hanover.  The system uses measuring systems and cameras installed at the entry and exit points of an extended stretch highway to record vehicle licence plate data and measure average speed between the two points.

If a vehicle’s average speed over the section of highway exceeds the maximum permitted, a conventional high-resolution frontal photograph is taken with driver recognition when the vehicle exits the section of the highway. The system automatically records data such as the licence plate and a photograph of the driver for use in a later prosecution.

All data are encrypted and details of vehicles that have not exceeded the speed limit are stored only temporarily.

The system will be installed by the end of March 2015 and the test phase will start in April. Approval for Germany is to be obtained from the Germany’s national metrology institute Physikalisch-Technische Bundesanstalt (PTB) in the course of this year which will allow the system to go into full operation, probably in autumn of 2015.

Jenoptik president and CEO Michael Mertin commented: “We are pleased that we can support such a trend-setting project in Germany with our experience. Our modern technology for section speed control has already contributed to increase traffic safety in other countries. It has been used successfully for several years in the United Kingdom, in Austria and Switzerland as well as in Kuwait.”

For more information on companies in this article

Related Content

  • Jenoptik receives $24m in traffic safety orders
    April 30, 2021
    Q1 figures are from the US and Canada, where Jenoptik sees increase in road safety interest 
  • Speed reduction measures - carrot or stick?
    January 23, 2012
    In Sweden, marketing company DDB Stockholm employed a mock speed camera as part of a promotional campaign for automotive manufacturer Volkswagen. The result was worldwide online interest and promotion of the debate over excessive speed to the national level. A developing trend in traffic management policy is to look at how to induce road users to modify their behaviour by incentivising change rather than forcing it through the application of penalties. There have been several studies conducted into this; an
  • ITS World Congress debates perceptions of enforcement
    December 4, 2012
    The technical programme of this year’s ITS World Congress in Vienna includes a special session on the image of enforcement. ITS International examines the scale of the problem and what can be done about it. Debate on the merits and difficulties of enforcing speed limits appears centred on a conflict of principles. Put very simply, local communities, people living close to busy or hazardous roads, want to see traffic speeds calmed. Drivers on those roads, on the whole, want their principle of freedom to be m
  • Machine vision offers new solutions to old problems
    October 28, 2014
    The transportation sector is set to benefit from a far wider range of machine vision technology. While machine vision techniques have been applied to traffic management applications for some years, in some areas there can still be a shortage of knowledge about what the technology can offer transportation professionals. The image processing and interpretation functions of machine vision enables control room staff to be immediately alerted to occurrences requiring attention which, in turn, enables each person