Skip to main content

Jenoptik technology for average speed enforcement pilot project

Jenoptik’s Traffic Solutions division is to participate in an 18-month Germany-wide section speed control (or average speed enforcement) pilot project. Jenoptik technology will initially be tested in Lower Saxony. Jenoptik will supply its laser scanner-based TraffiSection technology for the project in order to monitor the speed limit on a section of highway just under three kilometres in length on Federal Highway 6 south of Hanover. The system uses measuring systems and cameras installed at the entry an
February 3, 2015 Read time: 2 mins
79 Jenoptik’s Traffic Solutions division is to participate in an 18-month Germany-wide section speed control (or average speed enforcement) pilot project. Jenoptik technology will initially be tested in Lower Saxony.

Jenoptik will supply its laser scanner-based TraffiSection technology for the project in order to monitor the speed limit on a section of highway just under three kilometres in length on Federal Highway 6 south of Hanover.  The system uses measuring systems and cameras installed at the entry and exit points of an extended stretch highway to record vehicle licence plate data and measure average speed between the two points.

If a vehicle’s average speed over the section of highway exceeds the maximum permitted, a conventional high-resolution frontal photograph is taken with driver recognition when the vehicle exits the section of the highway. The system automatically records data such as the licence plate and a photograph of the driver for use in a later prosecution.

All data are encrypted and details of vehicles that have not exceeded the speed limit are stored only temporarily.

The system will be installed by the end of March 2015 and the test phase will start in April. Approval for Germany is to be obtained from the Germany’s national metrology institute Physikalisch-Technische Bundesanstalt (PTB) in the course of this year which will allow the system to go into full operation, probably in autumn of 2015.

Jenoptik president and CEO Michael Mertin commented: “We are pleased that we can support such a trend-setting project in Germany with our experience. Our modern technology for section speed control has already contributed to increase traffic safety in other countries. It has been used successfully for several years in the United Kingdom, in Austria and Switzerland as well as in Kuwait.”

Related Content

  • WIM system certification is a complex business
    February 21, 2018
    There are interesting moves afoot to create Germany’s first Weigh-In-Motion enforcement site in Hamburg – but Florian Weiss of Traffic Data Systems warns that WIM certification is a complex business. In the past, Weigh-In-Motion (WIM) was mainly used for statistical (WIM-S) and pre-selection (WIM-P) applications. These abbreviations - as well as WIM-E (enforcement) and WIM-T (tolling) - were created by Traffic Data Systems during Intertraffic 2006 in Amsterdam. This was also the year when we started the
  • Average speed cameras implemented on South Australia highway
    September 9, 2015
    The Sturt Highway, an important road link between Sydney and Adelaide, will become the fourth stretch of South Australian road to implement average speed cameras when the system is activated on 14 September. The cameras calculate the average speed of a vehicle between two points, as well as the vehicle’s actual speed at each camera location. Average speed cameras have been operating on Dukes Highway and Port Wakefield Road since July last year and on Victor Harbour Road since June this year. Two more
  • Jenoptik to deploy speed monitoring trailers in Cologne
    May 7, 2019
    Jenoptik is to deliver 10 semi-stationary speed monitoring trailers equipped with the TraffiStar S350 laser scanner to improve traffic safety in Cologne, Germany. The firm says its product allows users to monitor the speed of multiple vehicles and lanes simultaneously and assign measurement results to all the relevant vehicles using laser technology. With accumulator batteries, the measurement technology can be used independently of an external power supply for about a week – for instance, at accide
  • Siemens SafeZone switched on in the Netherlands
    May 29, 2014
    An inter-urban version of Siemens’ SafeZone speed enforcement system has been deployed and switched on in the Netherlands this month to discourage motorists from exceeding 80 kph on two sections of the A13 motorway, the main arterial route between Rotterdam and The Hague. Modified for the Dutch market, the award-winning solution was designed, supplied and installed by Siemens for the Ministry of Justice, Netherlands and will be serviced for a period of eight years. Based on automatic number plate re