Skip to main content

Australia assesses 30km/h safety benefits

Trial in Yarra near Melbourne found that vehicle speeds fell and residents approved
By Ben Spencer May 6, 2021 Read time: 2 mins
Australia findings give support for the likely safety benefits of the 30km/h trial (© Björn Wylezich | Dreamstime.com)

Australia's Monash University Accident Research Center has evaluated the benefits of a 30km/h speed limit trial in Yarra, near Melbourne. 

The city has a 40 km/h default speed limit, but wanted to reduce it in local residential streets.

A 'before and after' trial design was employed with a control (untreated) area to evaluate the safety outcomes. 

Speed limits were reduced in a trial area but remained at 40km/h in the control region.

Vehicle speeds were measured at around 100 selected sites in the trial and control areas, and resident surveys were undertaken in both regions before and after the trial.

In a paper available online, results show a reduction of 1.1% in average speed in the trial region but a surprising 2.7% in the control region. 

On further examination, it found significant reductions in the percent of vehicles exceeding 40km/h and 50km/h in both the treated and control regions, but not at 30km/h.

The survey results found increased support for the lower speed limit of 17% with little adverse consequences.

The findings give support for the likely safety benefits of the 30km/h trial with increased support from residents. 

According to the paper, speed reductions in the control region suggested a carry-over of the effects of the trial but also added support by local residents for reduced speed limits in the region.

Potential injury savings were estimated at a 4% reduction in the risk of a pedestrian injury from the observed treatment effect in the trial region. 
 

For more information on companies in this article

Related Content

  • Canadian authorities convinced of enforcement safety benefits
    November 28, 2012
    Cost-benefit analysis invariably finds highly in favour of speed and red light enforcement, particularly so in Edmonton in the Alberta province of Canada, where authorities need no convincing of the merits of road safety engineering. Justification of enforcement efforts on economic grounds has been reinforced this year, by a study of the costs and benefits of red light enforcement. New York-based economic research firm John Dunham & Associates carried out this latest analysis for American Traffic Solutions
  • euroFOT study demonstrates benefits of driver assistance systems
    June 26, 2012
    Today, the euroFOT consortium published the findings of a four-year study focused on the impact of driver assistance systems in the Europe. The €22 million (US$27.5 million) European Field Operational Test (euroFOT) project which began in June 2008 and involved 28 companies and organisations, was led by Aria Etemad from Ford’s European Research Centre in Aachen, Germany. The study looked at existing technologies and their potential to both enhance safety and reduce environmental impact. euroFOT also reveale
  • Report analyses multiple ITS projects to highlight cost and benefits
    March 16, 2015
    Every year in America cost benefit analysis is carried out on dozens of ITS installations and pilot studies and the findings, along with the lessons learned, are entered into the Department of Transportation’s (USDOT’s) web-based ITS Knowledge Resources database. This database holds more than 1,600 reports and periodically the USDOT reviews the material on file to draw conclusions from this wider body of evidence. It has just published one such review ITS Benefits, Costs, and Lessons Learned: 2014 Update Re
  • Study finds rumble strips save lives on rural highways
    June 2, 2015
    A recently completed study shows that rumble strips are proving to be an effective and low-cost way to reduce crashes on Michigan's state highways. The Michigan Department of Transportation (MDOT) started a major rumble strip program for two-lane high-speed rural highways in 2008. Centre-line and shoulder rumble strips were installed on all MDOT rural, non-freeway highways with posted speed limits of 55 mph and appropriate paved lane and shoulder widths. To date, 5,700 miles of centre-line rumble strips