Skip to main content

Siemens SafeZone starts operating in London

The first phase of a major safety camera upgrade project, which replaces older style spot cameras with a new average speed camera system, has gone live in London. The deployment of Siemens SafeZone has seen 50 automatic number plate recognition (ANPR) cameras installed at 24 sites along the A40 and is part of a contract awarded by TfL to replace existing speed cameras on four selected routes in the capital with new digital average speed enforcement systems. The roll-out of Siemens SafeZone on the A40
November 2, 2015 Read time: 2 mins
The first phase of a major safety camera upgrade project, which replaces older style spot cameras with a new average speed camera system, has gone live in London.

The deployment of 189 Siemens SafeZone has seen 50 automatic number plate recognition (ANPR) cameras installed at 24 sites along the A40 and is part of a contract awarded by TfL to replace existing speed cameras on four selected routes in the capital with new digital average speed enforcement systems.

The roll-out of Siemens SafeZone on the A40 will be followed by further deployments along the A406, due for completion in 2015, and the A316 and A2, due to go live next year. The project represents the largest deployment of Siemens SafeZone average speed enforcement solution in an urban area in the UK. Ongoing service and maintenance will also be provided by Siemens.

Siemens SafeZone solution is Home Office type approved and optimised for urban speed enforcement, 24 hours a day and in all weather conditions. Its ease of deployment also makes it a particularly cost effective solution. According to Siemens, SafeZone is capable of successfully identifying the vehicle registration mark and make, model and colour of vehicles in all light conditions from all lanes on a carriageway and calculating average speed over a measured distance within the speed enforcement zone.

For more information on companies in this article

Related Content

  • Wider uses for weigh in motion data
    March 18, 2014
    Colin Sowman talks to Terry Bergan of International Road Dynamics about the latest uses of weigh-in-motion systems. Raising allowable truck weight limits improve transport efficiency but leaves an ever-increasing number of bridges vulnerable to being overloaded and damaged by vehicles heavier, and in some cases far heavier, than they were designed to carry. The simplistic solution is to impose weight restrictions and erect appropriate signs - but this could have severe knock-on effect on trucking operations
  • Siemens delivers complete EV infrastructure packages
    December 19, 2014
    Siemens is delivering electric vehicle (EV) rapid charging networks across the UK, including networks consisting of almost forty QC45 multi-standard EV chargers to be supplied and installed in South Tyneside and Dorset early in 2015. The networks will be connected to Charge-Your-Car Back Office , and include three years maintenance support provided by Siemens. Funded by the Office for Low Emission Vehicles (OLEV), the network in South Tyneside will consist of twenty QC45 triple-outlet, rapid chargers.
  • Smoother running on Florida’s I-4
    March 11, 2025
    The Sunshine State is pioneering new implementations of V2X tech designed to smooth traffic flows and save lives. Andrew Stone shares the story so far…
  • Siemens to run North Yorkshire traffic signal network
    July 25, 2016
    Traffic management company Siemens has been awarded one of its first operational services contract to provide traffic signal network management and monitoring for North Yorkshire County Council (NYCC) in the UK. The new contract follows investment by NYCC in new technology and hosted systems combined with the introduction of Siemens Stratos, a cloud-based solution for all traffic management, control and monitoring requirements. As part of North Yorkshire’s Highway Maintenance Service, the County Counc