Skip to main content

Kapsch wooden gantry installed on Austrian highway

Renewable timber construction means Asfinag installation 'saves 15 tonnes of CO2'
By Adam Hill July 18, 2024 Read time: 2 mins
The Green Gantry is made from spruce and larch (© Kapsch TrafficCom)

Austrian roadway operator Asfinag has installed a Kapsch TrafficCom Green Gantry.

The largely prefabricated toll gantry is made from renewable timber rather than steel or aluminium, "which are associated with significant emissions due to their manufacturing and recycling processes", Kapsch says.

The company suggests that the Green Gantry on a highway in Carinthia, Austria, saves 15 tonnes of CO2, while comparable steel gantries create up to 30 tonnes of CO2 during production.

“Our Green Gantry not only has a positive CO2 balance, it has the same load-bearing capacity and an even better environmental impact as a traditional gantry," says Michael Weber, head of sales EMENA at Kapsch TrafficCom.

"In addition, it meets all relevant European norms and standards for gantries, so it is equally safe to deploy and to maintain, and after its lifetime of at least 20 years, it can be dismantled and re-used without causing additional pollution.”

"For us, sustainable construction is not just an empty slogan; we want to set new standards in this area," say Asfinag board members Hartwig Hufnagl and Herbert Kasser in a statement. "Innovations are the driving force behind this. Wood as a building material can also play an important role on the motorway in the future."

The gantry's load-bearing core is made of glued and laminated spruce timber, with weather-resistant larch wood used for the outer layer.

Installation of the gantry took "only about one day" and was managed by Asfinag and traffic technology specialist Forster.

Electricity for operating the gantry equipment comes from its own photovoltaic system, with battery storage also installed to ensure it works at night and in bad weather.

For more information on companies in this article

Related Content

  • C-ITS in Europe: It’s the governance, stupid!
    March 3, 2023
    Cooperative ITS (C-ITS) is coming – in fact, it’s already here. But who has responsibility for making it work? Richard Lax of Kapsch TrafficCom thinks there are lessons to be learned from the European experience
  • Plate matching technology more accurate than conventional OCR
    February 3, 2012
    EngiNe srl's patented Plate Matching technique is something of a paradox, in that it achieves formal vehicle identification without recognising, in the accepted sense, the characters on its number plate. Here, Angelo Dionisi of ENG Group explains how it works
  • TRL aids Highways Agency with M2 motorway hole investigation
    February 21, 2014
    The UK’s transport research Laboratory (TRL) provided a rapid response when asked for help as part of the investigation of the recent appearance of a hole in the central reservation of the M2 between junctions 5 near Sittingbourne and 6, near Faversham. The hole that appeared is believed to be a dene hole; an historic man made hole which may have been used to mine for chalk hundreds of years ago. The hole was filled in when the M2 was constructed, but recent wet weather contributed to the destabilisati
  • Growth of telematics-based pay as you drive car insurance systems
    July 17, 2012
    Car insurance made cheaper by telematics has returned to news headlines in the UK this year. Will it really take off this time and can vehicle tracking provide an effective tool for enforcing or encouraging insurance compliance? Jon Masters reports Will 2012 go down as the year that telematics-based car insurance took off? In the UK at least, a groundswell of new policies, with premiums priced on the basis of tracked and analysed driving style, suggests a turning point has been reached. Some would argue t