Skip to main content

Kapsch wooden gantry installed on Austrian highway

Renewable timber construction means Asfinag installation 'saves 15 tonnes of CO2'
By Adam Hill July 18, 2024 Read time: 2 mins
The Green Gantry is made from spruce and larch (© Kapsch TrafficCom)

Austrian roadway operator Asfinag has installed a Kapsch TrafficCom Green Gantry.

The largely prefabricated toll gantry is made from renewable timber rather than steel or aluminium, "which are associated with significant emissions due to their manufacturing and recycling processes", Kapsch says.

The company suggests that the Green Gantry on a highway in Carinthia, Austria, saves 15 tonnes of CO2, while comparable steel gantries create up to 30 tonnes of CO2 during production.

“Our Green Gantry not only has a positive CO2 balance, it has the same load-bearing capacity and an even better environmental impact as a traditional gantry," says Michael Weber, head of sales EMENA at Kapsch TrafficCom.

"In addition, it meets all relevant European norms and standards for gantries, so it is equally safe to deploy and to maintain, and after its lifetime of at least 20 years, it can be dismantled and re-used without causing additional pollution.”

"For us, sustainable construction is not just an empty slogan; we want to set new standards in this area," say Asfinag board members Hartwig Hufnagl and Herbert Kasser in a statement. "Innovations are the driving force behind this. Wood as a building material can also play an important role on the motorway in the future."

The gantry's load-bearing core is made of glued and laminated spruce timber, with weather-resistant larch wood used for the outer layer.

Installation of the gantry took "only about one day" and was managed by Asfinag and traffic technology specialist Forster.

Electricity for operating the gantry equipment comes from its own photovoltaic system, with battery storage also installed to ensure it works at night and in bad weather.

For more information on companies in this article

Related Content

  • Kapsch CarrierCom joins EU rail innovation initiative
    December 15, 2015
    Austrian railway telecommunication specialist Kapsch CarrierCom has joined the European rail joint technology initiative SHIFT²RAIL, which focuses on research and innovation to accelerate the development of new technologies, products and solutions for railways. Kapsch will contribute its expertise to SHIFT²RAIL’s Innovation Program 2 (IP2) for advanced traffic management and control systems and will carry out the analysis, specification and implementation of a prototype for an emergency call application
  • Governments must look beyond short-term spending of public funds
    February 2, 2012
    Phil Pettitt, Chief Executive of innovITS, the UK's ITS Centre of Excellence, argues that governments need to look beyond the short-term when looking to pump-prime economic recovery with public funds. It seems, in the current economic climate, that a 'good' day is one in which no company is announcing job cuts or going into administration. Consumer demand is down and businesses are retrenching, cutting costs and fretting over the consequences of shrinking opportunities and order books. It has not been this
  • Kapsch sets up Gothenburg free-flow
    July 14, 2022
    Existing tolling stations will be fully replaced covering 138 lanes in the Swedish city
  • Kapsch TrafficCom wins ETC order in Portugal
    April 17, 2012
    Kapsch TrafficCom has won an important order for an electronic toll collection (ETC) system for multi-lane free-flow traffic on 520 kilometres of Portugal’s primary road network. The company will install a total of 38 toll stations for the new system – doing away with the need for manual toll collection. When the system is fully deployed, tolls will be collected from all vehicles using this newly created ETC system. Kapsch will subsequently provide technical operation and maintenance of the system for the P