Skip to main content

Kapsch wooden gantry installed on Austrian highway

Renewable timber construction means Asfinag installation 'saves 15 tonnes of CO2'
By Adam Hill July 18, 2024 Read time: 2 mins
The Green Gantry is made from spruce and larch (© Kapsch TrafficCom)

Austrian roadway operator Asfinag has installed a Kapsch TrafficCom Green Gantry.

The largely prefabricated toll gantry is made from renewable timber rather than steel or aluminium, "which are associated with significant emissions due to their manufacturing and recycling processes", Kapsch says.

The company suggests that the Green Gantry on a highway in Carinthia, Austria, saves 15 tonnes of CO2, while comparable steel gantries create up to 30 tonnes of CO2 during production.

“Our Green Gantry not only has a positive CO2 balance, it has the same load-bearing capacity and an even better environmental impact as a traditional gantry," says Michael Weber, head of sales EMENA at Kapsch TrafficCom.

"In addition, it meets all relevant European norms and standards for gantries, so it is equally safe to deploy and to maintain, and after its lifetime of at least 20 years, it can be dismantled and re-used without causing additional pollution.”

"For us, sustainable construction is not just an empty slogan; we want to set new standards in this area," say Asfinag board members Hartwig Hufnagl and Herbert Kasser in a statement. "Innovations are the driving force behind this. Wood as a building material can also play an important role on the motorway in the future."

The gantry's load-bearing core is made of glued and laminated spruce timber, with weather-resistant larch wood used for the outer layer.

Installation of the gantry took "only about one day" and was managed by Asfinag and traffic technology specialist Forster.

Electricity for operating the gantry equipment comes from its own photovoltaic system, with battery storage also installed to ensure it works at night and in bad weather.

For more information on companies in this article

Related Content

  • Eco-conscious Evo signals green way
    October 24, 2022
    Made from 50% recycled plastic, new signal head on Evo ACM series improves aerodynamics
  • Remote remedies help US authorities identify bridge deficiencies
    September 6, 2017
    Every day 185 million vehicles – cars, trucks, school buses, emergency response units - cross one or more of America’s 55,710 'structurally compromised' steel and concrete road bridges, the highest concentration of which are in Iowa (nearly 5,000), Pennsylvania and Oklahoma. Nearly 2,000 of these crossings are located on interstate highways, according to the American Road and Transportation Builders Association's recent analysis of the US Department of Transportation's 2016 National Bridge Inventory.
  • OmniAir to design certification program for non-Kapsch readers and tags
    December 4, 2013
    The E-ZPass Group is to work with OmniAir Certification Services (OCS) to specify a testing program for ensuring full compliance of competitive equipment with E-ZPass readers and tags. OCS was hired by the E-ZPass Group for fees of around US$50,000 to detail the testing needed. The documents are due to be completed by the end of the year. Actual testing for certification will be negotiated by manufacturers with OCS-accredited testing firms. The move to certify additional suppliers’ equipment follows K
  • 90,000 e-truck charge points needed, says Scania boss
    April 28, 2020
    European auto group calls for massive increase in charging points for electric trucks.