Skip to main content

Consortium wins Bangladesh WiM deal

VaaaN-Regnum-NDE will install low-speed WiM system on both sides of Bangabandhu Bridge
By Adam Hill July 11, 2022 Read time: 1 min
There will be 10 units of low-speed LSWiM scales on the bridge (© Zobaer Alom | Dreamstime.com)

The Bangladesh Bridge Authority (BBA) has appointed the VaaaN-Regnum-NDE consortium to install and maintain Weigh in Motion (WiM) system on both sides of one of the country's major bridges.

Opened in Bangladesh in 1998, Bangabandhu Bridge is 4.9km long and spans the Jamuna River.

VaaaN-Regnum-NDE won against a number of international companies: the new deal covers supply, installation, testing and maintaining of 10 units of low-speed WiM (LSWiM) scales.

There will also be real-time web-based live video and data monitoring system with radio-frequency identification (RFID) installed, along with an ANPR camera system to identify the overweight vehicles.

BBA Quazi Muhammad Ferdous signed the agreement with Rony Basak, country head of VaaaN Infra, with Monjur Hossain, BBA executive director, Riyad Husain, MD of NDE Solutions and Mohammad Hossain Jony, MD of Regnum Resource.

For more information on companies in this article

Related Content

  • Opinion: MaaSive fail
    January 29, 2021
    Are we in danger of losing our way on Mobility as a Service? Johan Herrlin of Ito World wonders if there is too much focus on the system and not enough on problem-solving...
  • Measuring vehicle lengths with a single loop - promising results
    July 27, 2012
    District 7 of Caltrans has been conducting trials to see whether the use of a single inductive loop to measure vehicle lengths and so identify heavy trucks is feasible. So far, the results have been very promising, according to Lead Transportation Engineer Steve Malkson. Between them, the adjoining ports of Los Angeles and Long Beach, the US's two biggest, cover some 10,700 acres (43km2) and 68 miles (109km) of waterfront.
  • Stringent testing of Traffic Data Systems’ TMCS-IP WIM technology
    November 16, 2020
    Germany-headquartered Traffic Data Systems (TDS) has revealed details of a test on its Weigh In Motion (WIM) systems that was undertaken in August and September.
  • TDS exhibits OIML-R134 certified low- and high-speed WIM system
    March 20, 2018
    Traffic Data Systems is exhibiting its OIML-R134 certified low- and high-speed Weigh-In-Motion (WIM) system at Intertraffic 2018. Designed for a speed range from 5km/h to 120 km/h for HGVs, WIM-DSP 32/TMCS-U has been certified by the Federal Institute of Metrology (METAS) in Switzerland. “We’ve done WIM for almost 20 years,” says Florian Weiss, CEO of Traffic Data Systems. “The key thing at Intertraffic is to show customers that there is a system available with the certification they’ve asked for. Certifi