Skip to main content

Kapsch traffic management system debuts on Latvia highway

Cameras, sensors and radar systems in operation on 'high-speed' Kekava Bypass
By David Arminas November 27, 2023 Read time: 2 mins
The Ķekava Bypass project is a testament to the 'positive influence of state-of-the-art technology on road safety', says Marko Frank at Kapsch TrafficCom (image: Kapsch)

The Ķekava Bypass - Latvia's first "high-speed road" - opened in October and with it a traffic management system from Kapsch TrafficCom started operation.

The bypass is providing an efficient alternative for motorists travelling between the Latvian capital Riga, on the Baltic Sea, and neighbouring Lithuania to the south. Traffic in the small town of Ķekava is now being reduced.

Meanwhile, Kapsch TrafficCom's cameras, sensors and radar systems, as well as a modern and flexible traffic management software platform are contributing significantly to safety and sustainability along the bypass. 

"The Ķekava project is not only a milestone for road PPPs [public-private partnerships] and traffic in Latvia, but a testament to the positive influence of state-of-the-art technology on road safety," said Marko Frank, mobility expert and regional sales director at Kapsch TrafficCom.

The nearly 18km-long bypass is part of the A7 Bauska Highway, one of Latvia’s busiest roads with an average daily traffic volume of 17,000 vehicles and up to more than 25,000 at peak periods. The bypass is also designated part of pan-European TEN-T network called route E67 - the Via Baltica (Helsinki – Tallinn–Riga–Panevežys–Kaunas–Warsaw–Prague).

Construction of the €250 million bypass started in 2021 on what is the first highway in Latvia designated a high-speed road; pedestrians, cyclists and slow-moving agricultural vehicles are prohibited. However, pedestrians and cyclists are allowed on the parallel roads.

Juris Frīdmanis, general manager of the private partner consortium Kekava ABT, said he was confident that Kapsch TrafficCom technologies will ensure safe and efficient operation of the Ķekava Bypass for the next 20 years. 

It is monitored 24 hours per day thanks to more than 20 video surveillance cameras, two weather stations, traffic counting sensors, as well as data system analysing the traffic flow. Maximum driving speed on the bypass during the summer has been set at 120kmph but reduced to 90kph during winter - October 16 to April 15.

According to the client, the state-owned road management agency Latvian State Roads (LVC, Latvijas Valsts Celi) there are 900 lighting fixtures, 40km of steel and 4km of concrete safety barriers. Noise mitigation solutions such as noise barriers and soil embankments have been implemented along 7.5km of the road as well as 27km of animal fencing.

The consortium Kekava ABT consists of the Luxembourg-based infrastructure fund TIIC 2 S.C.A. SICAR as well as Latvian construction firms AS A.C.B. and CBR SIA Binders. Ķekava Bypass is the first major PPP project in road construction in the Baltics to be implemented according to the design-build-finance-operate model.

For more information on companies in this article

Related Content

  • Thailand tells drivers to speed up - and reduce accidents
    March 5, 2020
    Thailand's road authorities have revealed that nearly a third of accidents are caused by motorists driving too slowly in the fast lanes.
  • Safety issue for Swedish tunnel
    May 17, 2012
    Safety concerns have been raised over air pollution levels in Stockholm's 18km tunnel bypass. Data from the Swedish Transport Agency (Trafikverket) suggests that pollution in the Stockholm Bypass project (Förbifart Stockholm) could result in 20-30 fatalities/year due to the increased risk of triggering serious breathing disorders. The data suggests that high levels of dangerous particulate matter could pose a serious risk to users of the tunnel at peak periods. The new road will be paved with concrete rathe
  • ETSC presents road safety awards
    April 19, 2012
    The European Transport Safety Commission (ETSC) is giving awards to Lithuania and Sweden for the efforts these countries have made in improving road safety. The ETSC is monitoring progress in reaching the EU target of reducing road deaths by 50% between 2001 and 2010 under its Road Safety PIN Programme. And because Lithuania and Sweden have been so successful in improving road safety, ETSC handed its 2011 PIN Award to these countries. The Road Safety PIN Report 2011 was presented at the ETSC conference in B
  • Road design as a primary aid to speed enforcement?
    January 30, 2012
    Letty Aarts, senior researcher, SWOV institute for road safety research, the Netherlands, discusses how road design can act as a primary aid to speed enforcement