Skip to main content

Axis gets on board

Vision technology provider Axis Communications has set up a camera system for ATrain, which owns and operates rail services – including seven trains and one workshop - between Stockholm and Arlanda Airport. The Arlanda Express trains run on one of the few privately-operated railroad lines in Sweden. The company decided in 2015 to install a camera solution at train stations and depots to monitor flows of travellers, checking signs, elevators and escalators and making sure that the ticket machines are wor
August 30, 2019 Read time: 3 mins
Axis cameras were used in a security project for ATrain in Sweden
Vision technology provider 2215 Axis Communications has set up a camera system for ATrain, which owns and operates rail services – including seven trains and one workshop - between Stockholm and Arlanda Airport. The Arlanda Express trains run on one of the few privately-operated railroad lines in Sweden.


The company decided in 2015 to install a camera solution at train stations and depots to monitor flows of travellers, checking signs, elevators and escalators and making sure that the ticket machines are working – as well as to prevent crime and vandalism, such as graffiti. Not only does this criminal activity create a branding problem and incur cleaning costs, it also puts perpetrators in danger, given the close proximity to high-voltage power lines. Deterring such incidents was important.

ATrain has 180 employees, including train drivers, attendants and operations management personnel, and is responsible for safety and security at four stations – three at the airport and one at Stockholm Central Station. The station houses a despatch centre, where up to six people perform real-time surveillance of the camera monitors that oversee the stations and depot.

A relatively harsh environment used frequently by a lot of people, finding locations which needed to cover all the areas to be monitored, plus challenging lighting conditions, meant that high-quality cameras were required. The solution chosen was a combination of Axis network cameras and Embsec’s laser-based perimeter control sensor, VFence F-501. The fully-automated system monitors stretches along train routes where physical protection could not be set up.

Lighting is complex, with backlighting and light/dark parts of the screen common at a station, so an Axis Q6045 network camera with wide dynamic range is used. In addition to perimeter control, the camera can also be zoomed and controlled to check that signs, ticket machines, elevators and escalators are functioning correctly.  

VFence F-501 detects passing people and objects at a distance of up to 500m. The laser sensor functions without reflections and is connected to Axis cameras, sending an alarm directly to the camera when a laser beam is broken or a reference point changes. The moving camera is aimed at the occurrence, recording begins and action can be quickly taken, the company says.

“The components in this system are really top of the line,” says Jimmy Ahl, safety and security director at ATrain. “They meet the stringent requirements of this harsh and sometimes dangerous environment. With this modern technology, we feel very confident that we are giving our passengers and our employees the security and service they expect.”

For more information on companies in this article

Related Content

  • Keeping a weather eye on road conditions
    September 26, 2014
    Drive C2X has shown that advanced warning of poor road conditions could cut fatalities, as David Crawford explains. Connected vehicle (CV)-based warning technologies could mean 6% fewer deaths and 5% fewer injuries in road traffic accidents in Europe, according to the final results of the European Commission (EC) co-funded DRIVE C2X project. According to the European Centre for Information and Communication Technologies (EICT) which provided management support, these “prove that CV systems work and can hav
  • USDoT pilots show win-win potential for connected vehicles
    December 19, 2017
    Pete Goldin discovers the state of play with connected vehicles trials in the US and the impact of Hurricane Irma on Tampa’s pilot. The US Department of Transportation’s (USDoT’s) connected vehicle (CV) pilot sites have moved into phase 2 of the deployment programme– design, build, test and, maybe most importantly, collaborate.
  • On-road and in-vehicle are not in competition
    May 18, 2018
    The integrity and accuracy of data that can be verified by weigh-in-motion technology has been improving for decades – and the range of WIM applications is increasing at a tremendous pace. Chris Koniditsiotis, president of the International Society for Weigh-in-Motion (ISWIM) and CEO of Transport Certification Australia (TCA), began his career in 1985 as a pavements engineer. “When I joined this portfolio, the integrity, accuracy, and sampling frequency of mass information delivered at best an estimate, us
  • ITSA’s Shailen Bhatt looks to the future
    March 6, 2018
    The new boss of ITS America is fizzing with ideas. Shailen Bhatt talks to Adam Hill about the need to rebrand the ITS industry, how technology can leverage tax dollars – and where the Star Wars universe fits in to his philosophy. Shailen Bhatt has a big job on his hands. The CEO and president of the Intelligent Transportation Society of America is the second to hold the post in two years following the resignation last July of his predecessor Regina Hopper. It has not been the easiest time for the