Skip to main content

Volvo Trucks develops I-See to save fuel

Volvo Trucks has announced it has developed I-See, which operates like an autopilot and takes over gear-changing and utilises gradients to save fuel. The system, which will be available on the market next year, is linked to the transmission’s tilt sensor and obtains information about the topography digitally. The fact that the system is not dependent on maps makes it more dependable since it always obtains the very latest information. I-See can recall about 4,000 gradients, corresponding to a distance of 5,
June 28, 2012 Read time: 3 mins
RSS5874 Volvo Trucks has announced it has developed I-See, which operates like an autopilot and takes over gear-changing and utilises gradients to save fuel. The system, which will be available on the market next year, is linked to the transmission’s tilt sensor and obtains information about the topography digitally. The fact that the system is not dependent on maps makes it more dependable since it always obtains the very latest information. I-See can recall about 4,000 gradients, corresponding to a distance of 5,000 kms (3,100 mls).

“I-See is an autopilot linked to the truck’s cruise control, taking over and handling gear-changes, accelerator and brakes on gradients, ensuring they all operate in the most fuel-efficient way possible. I-See freewheels as much as possible – so on certain stretches of road no fuel is used at all,” explains Hayder Wokil, product manager at Volvo Trucks. “In this way fuel consumption can be cut by up to five per cent, a figure based on the results of simulations and tests on public roads. I-See requires use of the cruise control, and we know that on average drivers use cruise control about half the time. For a truck in normal operation, covering 140,000 kilometres (87,000 miles) a year, the saving will be about 1,000 litres of fuel annually. This makes a big difference to the haulage firm’s profitability.

I-See carries out six different operations to utilise the kinetic energy to the very maximum. For instance, it accelerates up hills, remains in a high gear for as long as possible and freewheels on descents to exploit the truck’s weight as a propulsion motor. Volvo says the system works best in undulating terrain. With moderately long and steep slopes, it ensures the truck can freewheel for long distances without using the engine,”

“It is this freewheeling capability that makes the system special,” explains Anders Eriksson, who was responsible for the development of I-See. “When the truck rolls freely, virtually no fuel is used. But in order to freewheel, a whole lot of data is required. It imposes high demands on precision. For instance, you have to know whether your speed will drop or increase over the next stretch of road. A gradient of just a few per cent can be the decisive factor,” Eriksson said. Other factors that make a difference are air resistance and the truck’s weight. All told the system has to keep track of and process a lot of information.

Eriksson also points out that it is not only fuel that is saved. “I-See reduces brake and tyre wear, for instance, and that naturally benefits the environment,” he says.

For more information on companies in this article

Related Content

  • Data revolution in real time travel information
    February 3, 2012
    Damian Black, CEO and founder of SQLstream Inc, writes about relational stream processing for real-time intelligent transport systems Almost unnoticed there is a revolution going on in Internet data which is different from anything seen before. It is taking place in sensor data, which research organisation Gartner predicts in 2012 will exceed 20 per cent of all non-video Internet traffic.
  • Idaho WIM systems save trucking industry time and money
    September 5, 2017
    Figures released by the Idaho Transportation Department indicate that weigh-in-motion (WIM) systems installed at the state’s four points of entry (POE) have saved the trucking industry time and money in the last year. The data shows that trucks bypassing the port save an average of five minutes of time per incident, and almost a half a gallon of fuel. This amounts to a savings of about US$8.68 per bypass. Commercial trucks using WIM to bypass Idaho ports saved 33,365 hours and more than 16,000 gallons of
  • IBTTA applauds Administration’s proposal to lift ban on interstate tolling
    May 1, 2014
    The International Bridge, Tunnel and Turnpike Association (IBTTA) has applauded the Obama Administration for including language in its surface transportation reauthorisation proposal, the Grow America Act, released earlier today that would ‘eliminate the prohibition on tolling existing free Interstate highways.’
  • European ITS Congress emphasises ITS development and deployment
    January 26, 2012
    The 8th European ITS Congress is a key event for the industry. Hermann Meyer, CEO of Ertico-ITS Europe puts the event in context