Skip to main content

Volvo Trucks develops I-See to save fuel

Volvo Trucks has announced it has developed I-See, which operates like an autopilot and takes over gear-changing and utilises gradients to save fuel. The system, which will be available on the market next year, is linked to the transmission’s tilt sensor and obtains information about the topography digitally. The fact that the system is not dependent on maps makes it more dependable since it always obtains the very latest information. I-See can recall about 4,000 gradients, corresponding to a distance of 5,
June 28, 2012 Read time: 3 mins
RSS5874 Volvo Trucks has announced it has developed I-See, which operates like an autopilot and takes over gear-changing and utilises gradients to save fuel. The system, which will be available on the market next year, is linked to the transmission’s tilt sensor and obtains information about the topography digitally. The fact that the system is not dependent on maps makes it more dependable since it always obtains the very latest information. I-See can recall about 4,000 gradients, corresponding to a distance of 5,000 kms (3,100 mls).

“I-See is an autopilot linked to the truck’s cruise control, taking over and handling gear-changes, accelerator and brakes on gradients, ensuring they all operate in the most fuel-efficient way possible. I-See freewheels as much as possible – so on certain stretches of road no fuel is used at all,” explains Hayder Wokil, product manager at Volvo Trucks. “In this way fuel consumption can be cut by up to five per cent, a figure based on the results of simulations and tests on public roads. I-See requires use of the cruise control, and we know that on average drivers use cruise control about half the time. For a truck in normal operation, covering 140,000 kilometres (87,000 miles) a year, the saving will be about 1,000 litres of fuel annually. This makes a big difference to the haulage firm’s profitability.

I-See carries out six different operations to utilise the kinetic energy to the very maximum. For instance, it accelerates up hills, remains in a high gear for as long as possible and freewheels on descents to exploit the truck’s weight as a propulsion motor. Volvo says the system works best in undulating terrain. With moderately long and steep slopes, it ensures the truck can freewheel for long distances without using the engine,”

“It is this freewheeling capability that makes the system special,” explains Anders Eriksson, who was responsible for the development of I-See. “When the truck rolls freely, virtually no fuel is used. But in order to freewheel, a whole lot of data is required. It imposes high demands on precision. For instance, you have to know whether your speed will drop or increase over the next stretch of road. A gradient of just a few per cent can be the decisive factor,” Eriksson said. Other factors that make a difference are air resistance and the truck’s weight. All told the system has to keep track of and process a lot of information.

Eriksson also points out that it is not only fuel that is saved. “I-See reduces brake and tyre wear, for instance, and that naturally benefits the environment,” he says.

For more information on companies in this article

Related Content

  • MG Squared’s lowering system integrated into Bosch range
    July 25, 2012
    Bosch Security Systems has announced the successful integration of its MIC Series 550 high-speed pan-tilt-zoom cameras with MG Squared’s Lowering System – a device used frequently in ITS and secure perimeter installations. The combination makes it even easier and safer to install and maintain pole-mounted MIC Series 550 cameras in these settings.
  • Cost-effective alternatives to traditional loops
    February 1, 2012
    Traffic signal control is a mainstay of urban congestion management. Despite advances in vehicle detection sensors, inductive loops, which operate by using a magnetic field to detect the metal components in vehicles, are still the most common enabler for intelligent signalised junctions.
  • ATRI seeks input on truck platooning
    November 25, 2014
    Working in collaboration with two FHWA-sponsored project teams, the American Transportation Research Institute (ATRI) is conducting research to explore trucking industry perspectives on the use of automated truck platooning, also known as Driver Assistive Truck Platooning. This concept is based on a system that controls inter-vehicle spacing based on information from forward-looking radars and direct vehicle-to-vehicle communications. Braking and other operational data is constantly exchanged between th
  • Safety issues fuel interest at PIARC’s tunnel conference in Lyon
    December 5, 2018
    1999’s fatal Mont Blanc fire means safety is a constant concern for tunnel operators. Alternative fuels and automated vehicles were also high on the agenda at PIARC’s first conference on the issue. David Arminas reports from Lyon – and walks the Croix-Rousse tunnel More than ever, tunnel management must be done in a holistic fashion. That was the message from André Broto, president of the World Road Associa-tion (PIARC) as he kicked off PIARC’s first International Conference on Tunnel Operations and Safe